Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green 240-pin DDR3 ECC registered DIMMs in static bags

OWC

OWC 32GB (4x8GB) DDR3 1333 ECC RDIMM Dell PowerEdge

SKU CH-GX59-D8WNV

ECC registered DDR3 kit adds 32 GB across four 8 GB modules at 1333 MHz for Dell PowerEdge C2100, C6105, M910, R810 and R910 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32 GB capacity across four 8 GB modules for expanded server memory
  • DDR3 1333 PC3-10600 CL9 speed for reliable registered performance
  • ECC registered design protects data integrity in Dell PowerEdge servers
  • 5 V 240-pin RDIMM form factor matches original Dell specifications
  • Direct replacement for Dell part numbers including A2984886 A2984887 A3198153

Dell PowerEdge Memory Kit

This 32 GB kit contains four 8 GB DDR3 1333 registered ECC modules built for Dell PowerEdge C2100, C6105, M910, R810 and R910 servers. It targets administrators upgrading or repairing those specific platforms.

Registered ECC Requirement

The modules are 240-pin DDR3 RDIMMs operating at 1.5 V with CL9 latency. They require a motherboard that supports registered ECC memory and cannot be mixed with unbuffered DIMMs or used in standard desktop systems.

Capacity and Limits

The kit delivers 32 GB total across four slots, suitable for virtualisation workloads and memory-intensive services on the listed servers. It will not fit boards limited to unbuffered memory or those requiring a different DDR generation.

Kohokohdat

  • 32 GB capacity across four 8 GB modules for expanded server memory
  • DDR3 1333 PC3-10600 CL9 speed for reliable registered performance
  • ECC registered design protects data integrity in Dell PowerEdge servers
  • 5 V 240-pin RDIMM form factor matches original Dell specifications
  • Direct replacement for Dell part numbers including A2984886 A2984887 A3198153

Tekniset tiedot

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge C2100
Dell PowerEdge C6105
Dell PowerEdge M910
Dell PowerEdge R810
Dell PowerEdge R910

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is the first limit that appears under sustained use with the DDR3 1333 (PC3-10600) CL9 modules?

The 1333 MT/s data rate and CL9 latency set the throughput ceiling; sustained workloads will be bound by that bus speed and timing.

How much heat and power do the 1.5V ECC registered DIMMs produce when running all day?

Each module operates at 1.5 V without a heat spreader; registered buffering adds slight controller overhead, so total power scales with the 32 GB capacity and server fan curves.

Which Dell PowerEdge systems must the buyer already own for this 4×8 GB kit to work?

The kit is validated for PowerEdge C2100, C6105, M910, R810 and R910; it replaces Dell part numbers such as A2984886, A3198153, A3858996 and SNPX3R5MC/8G.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.