Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR3 RDIMM modules in anti-static bags

OWC

OWC 32GB (4x8GB) DDR3 1333 ECC Registered RDIMM for HP Z800

SKU CH-2AG3-K1YFY

32 GB kit of four 8 GB DDR3 1333 ECC registered RDIMMs for the HP Z800 workstation

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in HP Z800 workstations
  • 32 GB kit with four 8 GB modules expands multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency
  • 5 V 240-pin RDIMM drops into existing slots without changes
  • Replaces HP part numbers including 500205071 and 593913B21 for direct compatibility

32GB DDR3 ECC Kit for HP Z800

This OWC upgrade kit supplies 32 GB of DDR3 1333 registered ECC memory in four 8 GB modules. It is built for the HP Workstation Z800 and replaces several original HP part numbers. The modules run at 1.5 V with CL9 latency and a 2Rx4 organisation. They are intended for workstation and server environments that require registered DIMMs.

Compatibility and Limits

The memory fits only systems that accept 240-pin DDR3 registered ECC RDIMMs such as the HP Z800. It will not work in standard desktop computers or any platform that requires unbuffered modules. Mixing these registered sticks with unbuffered memory is not supported. Buyers who need non-ECC or unbuffered memory should look elsewhere.

Registered ECC RDIMM Decides Fit

The single specification that determines whether this kit will work is the registered ECC RDIMM format. Only motherboards designed for registered error-correcting DDR3 DIMMs can use these modules. Verify that your system explicitly supports registered ECC memory before purchasing.

Kohokohdat

  • ECC registered design protects data integrity in HP Z800 workstations
  • 32 GB kit with four 8 GB modules expands multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency
  • 5 V 240-pin RDIMM drops into existing slots without changes
  • Replaces HP part numbers including 500205071 and 593913B21 for direct compatibility

Tekniset tiedot

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP Workstation Z800

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will these 240-pin DDR3 modules fit the HP Z800 memory slots?

Yes, the kit uses 240-pin DDR3 1333 registered DIMMs that match the HP Z800 slot layout and 1.5 V requirement.

What is the correct way to populate the four 8 GB sticks in the Z800, and what mistake should I avoid?

Install all four modules in matched-channel pairs as the Z800 manual directs; do not mix these registered DIMMs with any unbuffered memory.

When would the ECC registered DIMMs need replacement in a Z800?

Replace them only if memory diagnostics report correctable or uncorrectable ECC errors, or if a module fails the system POST memory test.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.