Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 32GB (8x4GB) DDR3 1600 CL11 ECC Unbuffered desktop RAM

SKU CH-KJ2C-5Y232

Eight-module kit provides 32 GB of DDR3 1600 ECC unbuffered memory at CL11 for desktops, workstations or servers

  • Capacity32GB (8 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (8 x 4GB)

  • 32 GB total capacity from eight 4 GB modules for heavy multitasking
  • DDR3 1600 speed with CL11 latency for responsive system performance
  • ECC unbuffered design protects data integrity in workstations and servers
  • JEDEC and RoHS compliant at 1.5 V for reliable, warranty-safe operation
  • 240-pin dual-channel kit installs easily in compatible desktops and NAS systems

32 GB DDR3 1600 ECC Kit

This OWC kit supplies 32 GB of DDR3 1600 memory across eight 4 GB unbuffered ECC UDIMMs. It runs at 1.5 V with CL11 timing and uses the standard 240-pin desktop form factor. The modules are JEDEC and RoHS compliant.

Workstations and Servers with DDR3 Slots

The ECC unbuffered design suits workstations, servers or NAS units that require error correction on a standard desktop memory controller. Systems needing registered DIMMs, non-ECC memory or a newer DDR generation will not accept these modules.

Eight-Module 32 GB Capacity

The kit delivers its full 32 GB only when all eight DIMMs are populated, so the board must provide eight DDR3 slots. If fewer slots are available, the total capacity will be lower.

Kohokohdat

  • 32 GB total capacity from eight 4 GB modules for heavy multitasking
  • DDR3 1600 speed with CL11 latency for responsive system performance
  • ECC unbuffered design protects data integrity in workstations and servers
  • JEDEC and RoHS compliant at 1.5 V for reliable, warranty-safe operation
  • 240-pin dual-channel kit installs easily in compatible desktops and NAS systems

Tekniset tiedot

BrandOWC
Part Number1E6D32R8032K
Capacity32GB (8 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard slot count and type does this 8 x 4 GB kit require?

The kit contains eight 240-pin DDR3 UDIMMs, so the board must provide eight DDR3 DIMM slots wired for unbuffered ECC modules.

Can I mix these 1.5 V CL11 sticks with older 1.35 V DDR3 modules I already have?

All eight modules run at 1.5 V and CL11; mixing voltages or latencies forces the system to the slowest common settings and may prevent boot on workstation or server platforms.

How do I confirm the full 32 GB is recognised with ECC active after installation?

Enter the BIOS or UEFI and verify 32 GB total capacity, 1600 MT/s speed, CL11 timings and ECC status shown as enabled or active.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.