OWC 32GB DDR4 2666 CL19 ECC UDIMM 2Rx8 1.2V memory upgrade
- 32GB
- 288-Pin DDR4 ECC UD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Adds 32 GB of DDR4 ECC memory at 2666 MT/s for compatible Supermicro X11SC motherboards
This OWC memory upgrade delivers 32 GB of DDR4 ECC unbuffered DIMM capacity in a single module. It is built for administrators and integrators who need to expand a supported Supermicro X11SC series motherboard with a warranty-safe, JEDEC-standard part. The module operates at 2666 MT/s with CL19 latency and 1.2 V power.
The very low profile height allows installation in space-constrained chassis where standard DIMMs would interfere with coolers or airflow. Gold 288-pin contacts mate directly with the motherboard slots on the listed X11SCW-F, X11SCE-F, X11SCL-LN4F, X11SCM-F and X11SCM-LN8F boards. No heat spreader is fitted, keeping the module thin for dense server layouts.
Error-correcting code protects data integrity in always-on workloads while the unbuffered design keeps latency low for single-socket configurations. The 2Rx8 rank structure and PC4-21300 rating define the electrical load each channel sees. Buyers needing registered DIMMs or non-ECC memory for consumer platforms cannot use this module.
| Brand | OWC |
|---|---|
| Part Number | 2E6V42R832GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC VLP UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11SCW-F Supermicro Motherboard X11SCE-F Supermicro Motherboard X11SCL-LN4F Supermicro Motherboard X11SCM-F Supermicro Motherboard X11SCM-LN8F |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module operates at DDR4 2666, which is the JEDEC-standard PC4-21300 speed grade; it will not exceed 2666 MT/s in this motherboard.
Yes, the 288-pin VLP form factor is designed for the X11SCW-F and the other listed Supermicro boards; the very-low-profile height clears standard CPU coolers.
Power down, open the chassis, align the notch on the 288-pin edge connector, press firmly until both retention clips click, then enable ECC in the BIOS — many builders forget the BIOS step.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?