OWC 16GB DDR4 2933MHz CL21 ECC Registered RDIMM 1.2V 288-pin server RAM
- 16GB
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32GB DDR4 2933MHz ECC registered RDIMM for servers, workstations and NAS systems with CL21 latency and 1.2V operation
Capacity 32GB
Rank 2Rx4
This OWC module delivers 32GB of DDR4 2933MHz memory with CL21 latency and 1.2V operation. It uses a 2Rx4 registered design with ECC for error correction in server and workstation environments. The 288-pin RDIMM form factor fits compatible enterprise platforms.
The module replaces slower DDR4 DIMMs and runs at 2133MHz, 2400MHz or 2666MHz when the platform requires it. The jump is worth it when your workload needs the full 2933MHz bandwidth and the motherboard supports registered ECC memory. It will not work in standard desktop boards that accept only unbuffered DIMMs.
Confirm that your server, workstation or NAS system requires 288-pin DDR4 registered ECC RDIMMs and supports the PC4-23400 speed grade. Check the system manual for maximum capacity per slot and whether 2Rx4 modules are qualified. Do not mix this registered module with unbuffered memory in the same system.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module uses the standard 288-pin DDR4 RDIMM form factor. It requires a server or workstation motherboard with registered DIMM slots; it will not fit standard desktop boards.
Power down the system, align the notch with the slot key, and press firmly until the retention clips click. The common error is mixing this registered memory with unbuffered modules, which the manufacturer warns against.
No firmware updates are required for the memory itself. It is a solid-state component with no moving parts, so it does not have a scheduled replacement interval under normal server operating conditions.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?