NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB DDR4 3200 ECC unbuffered UDIMM adds error-correcting capacity to workstations, servers or NAS systems
This module is a 32GB DDR4 3200 CL22 ECC unbuffered UDIMM built for desktop PCs, workstations, servers and NAS systems. It runs at 1.2V and uses a 288-pin 2Rx8 layout. The part is a direct replacement for QNAP RAM-32GDR4ECK0-UD-3200 and RAM-32GDR4ECT0-UD-3200.
The stick fits standard 288-pin DDR4 slots and operates at PC4-25600 speed with CL22 timing. ECC support adds single-bit error correction for data integrity in always-on workloads. Backward compatibility covers 2133MHz, 2400MHz, 2666MHz and 2933MHz platforms, so it can slot into older boards without a BIOS update. No heat spreader is fitted, leaving clearance for large CPU coolers.
The module suits administrators upgrading QNAP NAS units or building ECC-capable workstations and servers that need 32GB per slot. Buyers without ECC-capable chipsets, or those needing registered DIMMs or non-ECC memory, should select a different kit.
| Brand | OWC |
|---|---|
| Part Number | 3E2D42R832GB |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
This single module delivers 32GB of DDR4 memory at 3200MHz with CL22 latency, operating at 1.2V for stable performance in workstations, servers and NAS systems.
The module has no heat spreader and no active cooling, so it relies on case airflow; power draw stays at the standard 1.2V DDR4 level with no fan noise.
You need a desktop or server board with a 288-pin DDR4 DIMM slot that accepts unbuffered ECC modules; the stick is backward compatible with 2133, 2400, 2666 and 2933MHz speeds.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?