OWC 32GB DDR4 3200 CL22 2Rx4 ECC RDIMM 1.2V Gigabyte G242-P34 P35 P36 Z10 Z11
- 32GB
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB DDR4 3200 ECC registered RDIMM for Gigabyte H252-Z12, H261-Z60, H261-Z61, H262-NO0 and H262-NO1 servers
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This 32GB DDR4 3200 module is an ECC registered DIMM built for Gigabyte H252-Z12, H261-Z60, H261-Z61, H262-NO0 and H262-NO1 systems. It targets administrators upgrading workstations, servers or NAS units that require registered memory with error correction. Standard desktop boards cannot use this module.
The module runs at 3200MHz CL22 and is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz buses. Installing it upgrades capacity from smaller registered DIMMs or populates vacant slots to increase total memory. The jump is worth it when your workloads need more than the current installed capacity and the platform supports registered ECC.
Confirm your system accepts 288-pin DDR4 registered ECC RDIMMs and that you are not mixing with unbuffered or load-reduced modules. Check the motherboard manual for maximum capacity per slot and total supported memory. Ensure an odd number of modules is allowed if you plan a single 32GB stick.
| Brand | OWC |
|---|---|
| Part Number | 3R2D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | 22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Gigabyte H252-Z12 Gigabyte H261-Z60 Gigabyte H261-Z61 Gigabyte H262-NO0 Gigabyte H262-NO1 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the module is a 288-pin DDR4 ECC Registered DIMM validated for the Gigabyte H252-Z12, H261-Z60, H261-Z61, H262-NO0 and H262-NO1 systems.
Power down, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips lock, then verify in BIOS that the 3200 MHz CL22 1.2 V configuration is detected.
The module is built to JEDEC and RoHS specifications for continuous server operation; replacement is only needed if diagnostics report correctable ECC errors rising above threshold or a DIMM fails POST.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?