OWC 1GB DDR2 533 PC2-4200 CL4 240-pin 1.8V Non-ECC UDIMM desktop RAM
- 1GB
- DDR2 533 (PC2 4200)
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Dual-channel 4 GB DDR2 533 kit with two 2 GB unbuffered DIMMs at CL4 and 1.8 V for desktop upgrades
Capacity 4GB (2 x 2GB)
This OWC kit provides 4GB of DDR2 memory in a matched pair of 2GB modules. It is built for desktop systems that accept 240-pin unbuffered DIMMs running at 1.8V. The dual-channel configuration helps the memory controller move data more efficiently. Installation is a straightforward DIY task for most compatible machines.
JEDEC-standard timings and voltage keep the modules stable during extended work sessions. The CL4 latency at 533 MT/s delivers predictable bandwidth for everyday multitasking and larger file handling. Because every module is tested in-house, the kit maintains consistent throughput without thermal throttling. Users can leave applications open for hours without unexpected slowdowns.
The decisive figure is the DDR2 533 (PC2-4200) rating; only systems designed for this exact speed and voltage will accept the kit. Mixing different speeds or voltages will prevent the memory from functioning. Verify that the target desktop requires DDR2 533 before purchase. No other generation or speed is compatible with these modules.
| Brand | OWC |
|---|---|
| Part Number | 4U2D22R8004P |
| Capacity | 4GB (2 x 2GB) |
| Speed | DDR2 533 (PC2 4200) |
| CAS Latency | CL4 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Each module operates at the JEDEC-standard 1.8 V; the kit contains two 2 GB DIMMs, so total capacity is 4 GB running at DDR2 533 speeds.
The board needs two free 240-pin DDR2 slots that support PC2-4200 unbuffered non-ECC memory at 1.8 V.
The kit is rated CL4 at 533 MHz; if mixed with slower modules the system will run all channels at the lowest common speed and latency.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?