Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with gold edge connectors and black memory chips

OWC

OWC 5R6D54R4128G 128GB DDR5 5600 CL46 4Rx4 ECC Registered RDIMM memory upgrade

SKU CH-B5DD-33WZY

Single 128GB DDR5 5600 CL46 4Rx4 ECC registered RDIMM for select Supermicro SuperServer models

  • Capacity128GB
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCYes

Capacity 128GB

  • 128 GB single module expands server memory capacity
  • DDR5 5600 CL46 delivers high-speed data throughput
  • ECC registered design protects data integrity in critical workloads
  • 1 V operation reduces power draw per module
  • Qualified for Supermicro SuperServer SSG-121E-NE316R and listed compatible systems

Server-grade DDR5 ECC module

This 128GB registered DIMM targets Supermicro SuperServer platforms such as the SSG-121E-NE316R, SSG-121E-NES24R, SSG-221E-NE324R, SYS-111C-NR and SYS-111E-FDWTR. It is built for workloads that require error-correcting memory in workstations, NAS systems, servers and network switches. Standard desktop boards cannot use this module.

128GB single-stick capacity at 5600 MT/s

The module runs at DDR5 5600 (PC5-44800) with a CAS latency of 46 and operates at 1.1V. A single stick delivers 128GB, so maximum system memory depends on the number of slots the server provides. Workloads exceeding that total will need additional DIMMs or a platform with more channels.

288-pin registered design without heat spreader

The 4Rx4 registered layout adds a buffer that stabilises signals in dense configurations, but it cannot be mixed with unbuffered or load-reduced ECC memory. JEDEC and RoHS compliance ensures a warranty-safe upgrade. The bare PCB fits standard 288-pin DDR5 slots, leaving cooling to the chassis airflow.

Kohokohdat

  • 128 GB single module expands server memory capacity
  • DDR5 5600 CL46 delivers high-speed data throughput
  • ECC registered design protects data integrity in critical workloads
  • 1 V operation reduces power draw per module
  • Qualified for Supermicro SuperServer SSG-121E-NE316R and listed compatible systems

Tekniset tiedot

BrandOWC
Part Number5R6D54R4128G
Capacity128GB
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer SSG-121E-NE316R
Supermicro SuperServer SSG-121E-NES24R
Supermicro SuperServer SSG-221E-NE324R
Supermicro SuperServer SYS-111C-NR
Supermicro SuperServer SYS-111E-FDWTR

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 5600 CL46 4Rx4 module run with existing DDR5 4800 RDIMMs in my Supermicro SSG-121E?

The module follows JEDEC DDR5 5600 specifications. The server will clock all installed DIMMs to the lowest common speed, so 4800 RDIMMs will operate at 4800 MT/s.

How can I verify the 128GB 4Rx4 ECC registered module is detected correctly after installation?

Check the BIOS memory map or run `dmidecode -t memory` on Linux; you should see one 128GB DIMM at 5600 MT/s, CL46, 1.1V, registered, ECC enabled.

Does the single 128GB 288-pin RDIMM ship with a heat spreader or any extra accessories?

The module has no heat spreader and no extra accessories are included; only the DIMM itself is in the box.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.