Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 288-pin DDR4 RDIMM modules in static bags

OWC

OWC 64GB (2x32GB) DDR4 2133MHz CL15 ECC Registered RDIMM 1.2V 288-pin server RAM

SKU CH-N7ZZ-FD26F

Dual-channel 64 GB DDR4 2133 MHz CL15 ECC registered RDIMM kit for servers and workstations

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCYes

Capacity 64GB (2 x 32GB)

Rank 2Rx4

  • ECC registered design protects data integrity in servers
  • 64GB dual-channel kit enables higher memory capacity
  • DDR4 2133MHz CL15 speed matches JEDEC standard
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits server and workstation slots

64GB DDR4 ECC RDIMM kit

This 64GB kit contains two 32GB DDR4 2133MHz CL15 registered ECC RDIMMs built for servers, workstations and NAS systems. The modules operate at 1.2V and use a 288-pin 2Rx4 layout compliant with JEDEC PC4-17000 specifications. They are intended for multi-channel server platforms that require registered memory with error correction.

Installing registered ECC RDIMMs

Installation follows standard DIMM seating procedure, but the modules must go into slots that support registered ECC memory. Mixing these registered sticks with unbuffered memory will prevent the system from booting. Standard desktop motherboards and consumer laptops do not accept registered DIMMs, so verify platform compatibility before purchase.

Sustained server workload behaviour

Under continuous load the registered buffer reduces electrical stress on the memory controller, helping maintain signal integrity across all ranks. ECC corrects single-bit errors on the fly, preventing data corruption during long compute or storage tasks. The 1.2V operation keeps power draw predictable for dense multi-DIMM configurations.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 64GB dual-channel kit enables higher memory capacity
  • DDR4 2133MHz CL15 speed matches JEDEC standard
  • 2V operation reduces power draw per module
  • 288-pin RDIMM form factor fits server and workstation slots

Tekniset tiedot

BrandOWC
Part Number2R1D42R4064P
Capacity64GB (2 x 32GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the 2133 MHz CL15 ECC registered kit is running at the rated speed after installation?

Enter the system BIOS or UEFI and check the memory information screen; it should report 2133 MHz, CL15 timings and ECC registered status for both 32 GB modules.

What comes in the box and is anything else required to install the 2 x 32 GB RDIMMs?

The kit includes two 32 GB 288-pin DDR4 ECC registered DIMMs; no extra cables, brackets or heat spreaders are needed, just compatible server or workstation DIMM slots.

Which capacity version should I choose if my server supports 64 GB across two channels?

This 64 GB dual-channel kit provides two 32 GB modules, matching a two-channel 64 GB configuration exactly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.