OWC 64GB (2x32GB) DDR5 4800 CL40 ECC Registered RDIMM for Dell PowerEdge HS5610 HS5620
- 64GB (2 x 32GB)
- 288-Pin DDR5 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Dual 32 GB DDR5 4800 CL40 ECC registered RDIMMs at 1.1 V for Dell PowerEdge R6625, R760, R7615 and R7625 servers
Capacity 64GB (2 x 32GB)
This kit provides 64GB of DDR5 4800 memory in two 32GB registered DIMMs. It is built for Dell PowerEdge R6625, R760, R7615 and R7625 servers that require ECC registered modules. Standard desktop systems cannot use this memory type.
The modules run at the standard DDR5 voltage of 1.1V under JEDEC specifications. Registered buffering and ECC correction add minimal latency while maintaining signal integrity across full server loads. No heat spreaders are fitted, relying on chassis airflow for cooling.
This kit replaces lower-capacity DDR5 RDIMMs or fills empty slots in the listed PowerEdge models. The jump is worthwhile when workloads exceed current memory limits or when ECC registered reliability is required for virtualization and database tasks. Buyers needing unbuffered or load-reduced DIMMs should look elsewhere.
| Brand | OWC |
|---|---|
| Part Number | 4R8D52R8064P |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 ECC RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Dell PowerEdge R6625 Dell PowerEdge R760 Dell PowerEdge R7615 Dell PowerEdge R7625 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all 64GB are recognised at 4800 MT/s; the step often missed is seating both clips fully on each DIMM.
No scheduled maintenance is required; the modules have no heat spreaders or moving parts, so replacement is only needed if a DIMM fails ECC correction or the server's memory configuration changes.
The thermal envelope of the server's DIMM slots and airflow design becomes the limiting factor before the memory's own 4800 MT/s rating or 1.1 V operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?