OWC 32GB DDR5 5200 CL42 2Rx8 288-pin 1.1V Non-ECC UDIMM memory upgrade
- 32GB
- 288-Pin DDR5 Non-EC…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A 64 GB dual-channel DDR5 5200 kit built for the HP OMEN 45L GT22-2085t
Capacity 64GB (2 x 32GB)
This OWC kit adds 64GB of DDR5 memory across two 32GB UDIMM modules. It is built to match the specifications of the HP OMEN 45L GT22-2085t desktop. The 288-pin unbuffered non-ECC design fits the platform's memory slots directly. Users who need ECC error correction or registered modules should look elsewhere.
The modules operate at the JEDEC-standard 1.1V with a CAS latency of CL42 at 5200 MT/s. This voltage is the baseline for DDR5 UDIMMs and does not require increased cooling beyond normal case airflow. No heat spreader is fitted, so thermal performance depends on the system's existing ventilation. Power draw remains within standard DDR5 limits for this speed grade.
The package contains two 32GB modules totalling 64GB and no additional accessories or software. Each module is tested for JEDEC and RoHS compliance. The memory carries a limited lifetime warranty with access to technical support from the manufacturer. Installation follows the standard UDIMM procedure for the compatible HP OMEN model.
| Brand | OWC |
|---|---|
| Part Number | 5U2D52R8064P |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 Non-ECC UDIMM |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | CL42 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP OMEN 45L GT22-2085t |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power off the PC and unplug it, then open the case. Align each module's notch with the slot key and press down firmly until both side clips click. The step often missed is verifying both clips are fully locked.
The modules have no heat spreader and no moving parts, so no scheduled maintenance is required. Replacement is only needed if a module fails, which is covered by the limited lifetime warranty.
The JEDEC-standard 1.1V operating voltage and CL42 latency are fixed. Under sustained load the first limit is the memory controller's maximum supported speed of 5200 MT/s.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?