OWC 64GB (2x32GB) DDR5 5200 CL42 ECC Unbuffered UDIMM Kit
- 64GB (2 x 32GB)
- DDR5 5200 (PC5 4160…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Four 16 GB DDR5 modules at 5600 MT/s with ECC and CL46 latency for workstations and servers
Capacity 64GB (4 x 16GB)
This kit provides 64GB of DDR5 memory across four 16GB unbuffered UDIMMs. It is built for desktop workstations, servers and NAS systems that require ECC protection. Each module runs at 5600MHz with CL46 latency at 1.1V. The 288-pin design follows the standard desktop DIMM layout.
On-die ECC corrects single-bit errors without needing registered buffers, helping data integrity in long-running workloads. The modules meet JEDEC DDR5 specifications and are ROHS compliant. OWC validates every stick in its own lab to match OEM requirements. No heat spreader or lighting is included, keeping the profile low for dense chassis.
Confirm your motherboard or server board accepts DDR5 unbuffered ECC UDIMMs and supports 5600MHz operation at 1.1V. Check that the CPU memory controller can address four ranks per channel with 1Rx8 organisation. Verify the BIOS has an appropriate XMP or JEDEC profile for this speed. Ensure the four slots you will populate belong to the same channel pair for dual-channel bandwidth.
| Brand | OWC |
|---|---|
| Part Number | 5E6D51R8064S |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
These 288-pin ECC unbuffered DIMMs ship without a heat spreader; most workstation chassis provide enough airflow, but you can add aftermarket spreaders if your case runs warm.
The JEDEC-standard 5600 MT/s data rate and CL46 latency are the fixed limits; the memory controller cannot push the modules beyond those rated figures.
At the rated 1.1V the kit draws minimal power for DDR5, and with no onboard LEDs or spreaders the thermal output stays low in typical workstation or NAS airflow.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?