OWC 32GB (2x16GB) DDR4 2400 ECC RDIMM CL17 1Rx4 1.2V memory upgrade
- 32GB (2 x 16GB)
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A single 64GB DDR4 2400 ECC load-reduced DIMM for Cisco UCS B200 M4 and C220 M4 servers
This 64GB DDR4 LRDIMM module is built for Cisco UCS B200 M4 and C220 M4 servers. It delivers ECC load-reduced operation at 2400MHz with a CL17 latency. The single 64GB stick targets administrators who need maximum capacity per slot in compatible enterprise platforms.
The module uses a 288-pin DDR4 form factor without a heat spreader and runs at 1.2V. Load-reduced buffering reduces electrical load on the memory controller, allowing higher densities than standard registered DIMMs. It cannot be mixed with unbuffered or standard registered ECC memory in the same system.
The PC4-19200 interface caps bandwidth at the DDR4 2400 data rate, with backward compatibility to 2133MHz systems. Capacity scaling is limited by the server's maximum supported memory per socket and total slot count. Buyers needing higher frequencies or desktop compatibility must choose a different memory type.
| Brand | OWC |
|---|---|
| Part Number | 2L4D44R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B200 M4 Cisco UCS C220 M4 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the module is backward compatible and will operate at 2133MHz when installed in systems that only support that speed.
It fits a standard 288-pin DDR4 DIMM slot in a Cisco UCS B200 M4 or C220 M4 server; no heat spreader is present.
Insert the module into an empty DDR4 slot, then ensure you do not mix it with unbuffered or standard registered ECC DIMMs in the same system.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?