Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with gold edge contacts and black memory chips

OWC

OWC 64GB DDR4 2933 ECC Registered RDIMM 2Rx4 HP Z6 G4

SKU CH-Z9WB-765SA

A 64GB DDR4 2933 ECC registered RDIMM module designed for the HP Z6 G4 workstation

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 64GB

  • 64 GB capacity lets you run large workloads on HP Z6 G4
  • ECC registered design detects and corrects memory errors for server reliability
  • DDR4 2933 CL21 speed matches HP part numbers P19045-K21 and P00930-H21
  • Single 2Rx4 288-pin module installs in one slot for easy upgrade
  • 2 V operation reduces power draw while maintaining 23400 MT/s bandwidth

HP Z6 G4 Workstation Upgrade

This 64GB DDR4 2933 ECC Registered RDIMM is built specifically for the HP Workstation Z6 G4. It delivers error-correcting registered memory for servers, workstations and NAS systems that require data integrity. The single 2Rx4 module runs at 1.2V with CL21 latency.

Replaces HP OEM Modules

The module replaces HP part numbers including P19045-K21, P19045-B21, P00930-H21, P14636-001, P00930-K21, P06192-001, P03053-CA1, P00930-B21, P03053-1A1, P03053-0A1, P14492-B21 and P19045-H21. It is backward compatible with 2133MHz, 2400MHz and 2666MHz systems, so the jump is worth it when you need maximum capacity in a single slot.

For ECC Registered Platforms Only

This memory suits administrators upgrading HP Z6 G4 workstations or compatible server and NAS platforms that demand ECC Registered DIMMs. It will not work in standard desktop computers and cannot be mixed with unbuffered or ECC load-reduced modules. Buyers needing non-ECC or consumer DDR4 should look elsewhere.

Kohokohdat

  • 64 GB capacity lets you run large workloads on HP Z6 G4
  • ECC registered design detects and corrects memory errors for server reliability
  • DDR4 2933 CL21 speed matches HP part numbers P19045-K21 and P00930-H21
  • Single 2Rx4 288-pin module installs in one slot for easy upgrade
  • 2 V operation reduces power draw while maintaining 23400 MT/s bandwidth

Tekniset tiedot

BrandOWC
Part Number2R9D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP Workstation Z6 G4

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 288-pin DDR4 RDIMM fit the HP Z6 G4 memory slots?

Yes, the module uses the standard 288-pin DDR4 RDIMM form factor required by the HP Workstation Z6 G4.

What is the correct way to install this 2Rx4 ECC registered module, and what mistake should I avoid?

Power down, open the chassis, align the notch with the slot key, and press firmly until both clips lock; do not mix this registered DIMM with unbuffered or load-reduced memory.

Will this 64 GB module need any firmware updates or component replacements during its service life?

No firmware updates are required for the memory itself; the module is backed by a limited lifetime warranty and advanced replacement program if a defect ever occurs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.