Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 8GB (4x2GB) DDR2 667 PC2-5300 CL5 240-pin desktop RAM

SKU CH-4V4S-C7PPX

8GB kit of four 2GB DDR2 667 modules with CL5 latency and 1.8V operation

  • Capacity8GB (4 x 2GB)
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.8V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 8GB (4 x 2GB)

  • 8 GB total capacity lets you run more apps at once
  • 667 MHz DDR2 speed matches PC2-5300 system requirements
  • CL5 latency keeps data access responsive for everyday tasks
  • 8 V JEDEC standard voltage ensures stable operation without extra cooling
  • 240-pin unbuffered non-ECC modules install easily in compatible desktop slots

8 GB DDR2 667 kit for desktop upgrades

This kit contains four 2 GB unbuffered DDR2 667 modules that operate at 1.8 V with CL5 timing. It is intended for owners of older desktop systems that accept 240-pin UDIMMs and need a straightforward capacity increase.

Capacity and headroom: 8 GB total across four slots

The 8 GB total fills four DIMM slots, giving a legacy platform enough memory for everyday multitasking and larger file handling. Systems limited to DDR2 667 will run at that speed, and the CL5 latency is fixed by the JEDEC specification.

JEDEC-standard 1.8 V DDR2 667 specification

The modules conform to the PC2-5300 JEDEC standard, so they install without voltage or timing changes in compatible motherboards. Buyers must verify that their desktop accepts DDR2 667 UDIMMs before purchase, because DDR2 is physically and electrically incompatible with later DDR generations.

Kohokohdat

  • 8 GB total capacity lets you run more apps at once
  • 667 MHz DDR2 speed matches PC2-5300 system requirements
  • CL5 latency keeps data access responsive for everyday tasks
  • 8 V JEDEC standard voltage ensures stable operation without extra cooling
  • 240-pin unbuffered non-ECC modules install easily in compatible desktop slots

Tekniset tiedot

BrandOWC
Part Number5U3D22R8008S
Capacity8GB (4 x 2GB)
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 8 GB kit install in a desktop that uses 240-pin DDR2 slots?

Yes — the kit contains four 2 GB unbuffered DIMMs built to the 240-pin DDR2 667 PC2-5300 CL5 1.8 V JEDEC standard, so any board accepting that specification can use them.

Does the kit require matched pairs for dual-channel operation?

The four modules are sold as a matched set; populating two or four slots on a dual-channel board will run in dual-channel mode automatically.

Is the memory compatible with systems limited to 1.8 V DDR2?

Each module operates at the standard 1.8 V for DDR2 667, matching the voltage requirement of boards designed for that generation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.