OWC 4GB DDR4 2400MHz CL17 1.2V 288pin UDIMM HP 570-p031nd/31/32/35
- 4GB
- 288-Pin DDR4 Non-EC…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
8GB DDR3L 1600 CL11 1.35V DIMM upgrades HP ProDesk 400 G2.5 SFF systems
This 8GB DDR3L 1600 CL11 module is built specifically for the HP ProDesk 400 G2.5 SFF. It runs at 1.35V as a non-ECC unbuffered DIMM with a 2Rx8 rank configuration. The JEDEC-standard part upgrades compatible small-form-factor desktops with a single-slot memory increase.
Verify the system uses 240-pin DDR3L slots and supports 1.35V unbuffered non-ECC modules at 1600 speed. Confirm the motherboard accepts a 2Rx8 8GB density per slot and that an empty DIMM socket is available. The upgrade requires no ECC or registered memory support.
Swapping a 4GB or smaller stick for this 8GB unit doubles per-slot capacity while keeping voltage and timing identical. The jump is worth it when multitasking or larger files exceed the current memory ceiling. It does not suit builds needing ECC, registered DIMMs or a different DDR generation.
| Brand | OWC |
|---|---|
| Part Number | 1U6T32R808GB |
| Capacity | 8GB |
| Type | 240-Pin DDR3L Non-ECC UDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP ProDesk 400 G2.5 SFF |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The package includes one 8GB DDR3L 1600 PC3L-12800 CL11 2Rx8 240-pin 1.35V Non-ECC Unbuffered DIMM; no additional components are required for installation.
This module is an 8GB DDR3L 1600 CL11 2Rx8 1.35V DIMM validated for the HP ProDesk 400 G2.5 SFF; choose it when you need a single 8GB upgrade.
The 1600MHz PC3L-12800 CL11 1.35V specification provides JEDEC-standard DDR3L bandwidth and latency for the HP ProDesk 400 G2.5 SFF.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?