Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small black plastic PWM fan controller with LED and knob, SATA and DC 5525 power inputs, six 4-pin ports

OwlTree PC042 4 Pin 12V PWM Fan Control 60W 5A 6 Fans SATA DC 5525

SKU CH-75Y6-7VFW2 MPN PC042

Controls up to six 4-pin PWM fans with adjustable 1–99 % duty cycle from a single SATA or DC 5.5×2.5 mm 12 V supply, delivering 60 W total

  • Product name4 Pin 12V PWM Fan Speed Controller OwlTree
  • motor size2.7 in x 1.6 in x 0.7 in
  • type of bulbLED
  • voltage12 volts
  • electrical usage (watts)60 watt_hours
  • featuresLED
  • Controls six 4-pin PWM fans from one hub
  • 60 W total output keeps high-speed fans running safely
  • Dual SATA and DC 5525 power inputs suit any PSU
  • Adjustable 1–99 % duty cycle for precise speed tuning
  • Compact 2.7 × 1.6 × .7 in plastic body fits tight cases

PWM fan controller for six fans

The OwlTree PC042 is a 4-pin 12V PWM fan controller that supports up to six fans from a single hub. It draws power through either a SATA connector or a DC 5.5×2.5 mm jack and provides a combined 60 W at 5 A. A manual knob adjusts the PWM duty cycle from 1 % to 99 %. The unit is built from black plastic and weighs 0.06 kg.

Suits builders with multiple 4-pin fans

This controller is for system builders who need to run up to six 4-pin PWM fans from one power source and prefer a physical speed dial. It is not for users with 3-pin or 2-pin fans, because the headers are not compatible. Buyers who want software or motherboard-based fan curves should look at something else. The package contains only the controller; fans and cables are not included.

Handles six fans within a 60 W limit

Each of the six ports can deliver up to 2 A, but the total current must stay at or below 5 A, giving a 60 W ceiling at 12 V. That headroom comfortably covers several typical case fans running together. If the combined draw of all connected fans exceeds 5 A the controller will not provide enough power. No higher-capacity option is offered in this model.

Kohokohdat

  • Controls six 4-pin PWM fans from one hub
  • 60 W total output keeps high-speed fans running safely
  • Dual SATA and DC 5525 power inputs suit any PSU
  • Adjustable 1–99 % duty cycle for precise speed tuning
  • Compact 2.7 × 1.6 × .7 in plastic body fits tight cases

Tekniset tiedot

BrandOwlTree
ModelPC042
Product name4 Pin 12V PWM Fan Speed Controller OwlTree
motor size2.7 in x 1.6 in x 0.7 in
type of bulbLED
voltage12 volts
electrical usage (watts)60 watt_hours
featuresLED
weight0.06 kilograms
description4 Pin 12V PWM Fan Speed Controller, LED, Plastic, Black, OwlTree, PC042
finishPlastic
materialPlastic
dimensions2.6 cm x 10.4 cm x 15.2 cm

Kysymyksiä tästä tuotteesta

What power connections do I need on my power supply to run this controller?

The unit accepts either a SATA 12 V connector or a DC 5.5×2.5 mm (5525) 12 V plug, so you need one of those free on your PSU or an appropriate adapter.

Will my existing 3-pin case fans work with the six 4-pin headers on this hub?

No, the controller only supports 4-pin PWM fans; 3-pin or 2-pin fans are not compatible with its six ports.

How can I confirm the PWM signal is actually reaching each fan after I wire everything up?

Turn the speed knob and watch the LED indicator; the fans should spin from a low 1 % duty cycle up to 99 %, proving the PWM signal is active on every connected port.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.