Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

partaker

partaker A19-New-J6412-32G1TBSSD 12.1" all-in-one PC

SKU CH-H73Q-Y0ZBQ

A 12.1 inch IP65-rated industrial all-in-one with a resistive multi-touch screen, Intel Celeron J6413 processor, 32 GB DDR4 memory, 1 TB SATA SSD, Windows 11 Pro, three LAN ports, two COM ports.

  • Form FactorAll-in-One
  • Operating SystemWindows 11 Pro
  • CPU TypeCeleron
  • GPU/VGA TypeIntel UHD Graphics
  • Memory Capacity32GB DDR4
  • Maximum Memory Supported32 GB

Memory Capacity 32GB DDR4

SSD 1TB

  • IP65 front panel resists dust and water ingress
  • Fanless aluminium alloy chassis runs silently 24/7
  • 32 GB DDR4 memory handles multi-tasking smoothly
  • 1 TB SATA SSD stores large datasets fast
  • Wide 9-36 V DC input suits industrial power systems

12.1″ Industrial Panel PC

This 12.1-inch all-in-one computer integrates a resistive multi-touch display rated IP65 on the front panel. It runs on an Intel Celeron J6413 processor with Intel UHD Graphics and comes with 32 GB of DDR4 memory and a 1 TB SATA SSD. Windows 11 Pro is pre-installed for immediate deployment in industrial environments.

Suited for factory automation and kiosk builders

The fanless aluminium chassis, 9–36 V Phoenix power input and wide operating temperature range make it viable for continuous embedded or wall-mounted use. Buyers who need a capacitive touch surface, a larger screen diagonal or a higher-resolution panel should evaluate other form factors. Systems requiring discrete graphics performance or user-upgradeable memory beyond the soldered limit are not addressed by this unit.

Verify mounting cut-out and voltage before ordering

The embedded installation cut-out measures 298.5 mm by 237 mm; confirm your enclosure matches these dimensions. Ensure the site can supply a stable DC source within the 9–36 V range through the two-pin Phoenix connector. Check that the three Intel Gigabit LAN ports and two configurable COM ports satisfy the required industrial protocol mix.

Kohokohdat

  • IP65 front panel resists dust and water ingress
  • Fanless aluminium alloy chassis runs silently 24/7
  • 32 GB DDR4 memory handles multi-tasking smoothly
  • 1 TB SATA SSD stores large datasets fast
  • Wide 9-36 V DC input suits industrial power systems

Tekniset tiedot

ModelA19-New-J6412-32G1TBSSD
Form FactorAll-in-One
Operating SystemWindows 11 Pro
CPU TypeCeleron
GPU/VGA TypeIntel UHD Graphics
Memory Capacity32GB DDR4
Maximum Memory Supported32 GB
SSD1TB
HDDNo
Screen Size12.1"
TouchscreenYes

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does this panel PC need an external power brick, or does it run directly from a 9-36 V DC source?

It accepts 9-36 V DC through the 2-pin Phoenix connector; a 12 V 5 A AC-DC adapter is included for mains connection.

Can I keep using my existing RS-422 and RS-485 devices with the two COM ports?

Yes, COM1 and COM2 each support RS232, RS422 and RS485 so legacy serial equipment connects without adapters.

How can I confirm the Intel UHD Graphics is driving the 1024 x 768 touchscreen at the correct resolution?

Open Windows Display Settings; the panel will show 1024 x 768 as the native resolution and the touch input will respond immediately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.