Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
17 inch industrial all-in-one PC with flat IP65 front panel and multi-touch screen

partaker

partaker A21 17" Industrial All-in-One PC i3-10110U 8GB 128GB

SKU CH-8BQA-PAKKH

17" IP65 industrial all-in-one with Core i3-10110U, 8GB DDR4, 128GB SSD, Windows 11 Pro, fanless aluminium chassis, multi-touch resistive screen, 9-36V wide-range power, dual LAN, dual COM.

  • Form FactorAll-in-One
  • Operating SystemWindows 11 Pro
  • CPU TypeIntel Core i3 10th Gen
  • GPU/VGA TypeIntel UHD Graphics
  • Memory Capacity8GB DDR4
  • Maximum Memory Supported32 GB
  • IP65 front panel resists dust and water ingress
  • Fanless aluminium chassis runs silently in noise-sensitive areas
  • 9–36 V wide-range input suits unstable industrial power
  • Dual Intel LAN ports provide redundant network paths
  • Expandable to 32 GB DDR4 for heavier workloads

Industrial 17-inch touch panel PC

The Partaker A21 is a sealed all-in-one computer built around an Intel Core i3-10110U processor, 8 GB of DDR4 memory and a 128 GB SATA SSD. Its IP65-rated front panel and fanless aluminium chassis are designed for continuous operation in factories, kiosks or outdoor cabinets where dust, moisture and wide temperature swings are routine.

Check power, mounting and I/O needs

Verify that your site can supply 9–36 V DC through the 2-pin Phoenix connector or the included 12 V 5 A adapter. Confirm the 389 x 321 mm cut-out matches your panel opening if you plan an embedded fit, and ensure the two COM ports, dual LAN, HDMI and four USB 3.0 ports cover the peripheral mix your application requires.

Fanless aluminium build with versatile mounting

The solid alloy body doubles as a heatsink, so the system runs silently and survives vibration that would kill active-cooled gear. VESA, wall, desktop and cantilever brackets are all supported, letting you bolt the same unit to a machine frame, a control-room wall or a swing arm without redesigning the enclosure.

Kohokohdat

  • IP65 front panel resists dust and water ingress
  • Fanless aluminium chassis runs silently in noise-sensitive areas
  • 9–36 V wide-range input suits unstable industrial power
  • Dual Intel LAN ports provide redundant network paths
  • Expandable to 32 GB DDR4 for heavier workloads

Tekniset tiedot

ModelA21-New-I3-10110U-8G128G
Form FactorAll-in-One
Operating SystemWindows 11 Pro
CPU TypeIntel Core i3 10th Gen
GPU/VGA TypeIntel UHD Graphics
Memory Capacity8GB DDR4
Maximum Memory Supported32 GB
HDDNo
Screen Size17"
TouchscreenYes

Kysymyksiä tästä tuotteesta

Does the box include the 12V 5A power adapter and mounting kits, or do I need to buy them separately?

The unit ships with a 12V 5A power supply and mounting kits included; no separate purchase is required for those items.

Should I choose the 8 GB DDR4-2666 SODIMM configuration or plan to upgrade to the 32 GB maximum?

The system comes with one 8 GB DDR4-2666 SODIMM installed and supports up to 32 GB total; add a second module if your workload needs more memory.

What does the IP65 front-panel rating mean for daily use on a factory floor?

The 17" 1280 x 1024 resistive touchscreen is sealed against dust and low-pressure water jets, so it withstands wash-downs and airborne particulates in industrial environments.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.