Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

partaker

partaker A26 AI edge system 12.1 resistive touch i5-5200U 4GB 128GB

SKU CH-30GE-B7T9K

A 12.1-inch resistive touch panel PC with an IP65 front, fanless aluminum chassis, Intel Core i5-5200U, 4GB DDR3 and 128GB mSATA storage

  • TypeAll-in-One PC
  • Form FactorAll-in-One
  • ColorGray
  • Operating SystemWindows 10 Pro
  • CPU TypeIntel Core i5 5th Gen
  • CPU NameIntel Core i5-5200U

A26 12.1" Resistive I5 5200U 4GB RAM / 128GB SSD

  • 1-inch resistive touch screen rated for 50 million touches
  • Fanless aluminium alloy chassis with IP65 front protection for harsh environments
  • Intel Core i5-5200U dual-core processor up to 2.70 GHz
  • 4 GB DDR3 memory and 128 GB mSATA storage included
  • Dual Gigabit LAN, dual COM RS232/485, four USB and HDMI connectivity

Industrial touch panel PC

The Partaker A26 is a 12.1-inch all-in-one system built around an Intel Core i5-5200U processor with 4GB of DDR3 memory and a 128GB mSATA drive. It ships with Windows 10 Pro installed and targets machine operators and integrators who need a compact, self-contained Windows station for factory-floor visualisation and control tasks.

Fanless aluminium chassis with IP65 front

The unit uses a silent, fanless aluminium alloy enclosure rated IP65 on the front panel, resisting dust and water jets in harsh environments. Mounting options include a 298.5 by 237 millimetre panel cut-out or standard VESA fixtures, while dual Gigabit LAN, two configurable RS232/485 COM ports, four USB ports, HDMI output and audio connect directly to PLCs, sensors and peripheral equipment.

Upgrade from legacy panel PCs

The jump makes sense when an older resistive-touch terminal lacks modern I/O, when a discrete industrial PC plus monitor creates cabling and space problems, or when a project demands Windows 10 Pro on a validated, wide-temperature platform. Buyers who need capacitive multi-touch, higher resolution, or greater expandability should look elsewhere.

Kohokohdat

  • 1-inch resistive touch screen rated for 50 million touches
  • Fanless aluminium alloy chassis with IP65 front protection for harsh environments
  • Intel Core i5-5200U dual-core processor up to 2.70 GHz
  • 4 GB DDR3 memory and 128 GB mSATA storage included
  • Dual Gigabit LAN, dual COM RS232/485, four USB and HDMI connectivity

Tekniset tiedot

TypeAll-in-One PC
Form FactorAll-in-One
ColorGray
Operating SystemWindows 10 Pro
CPU TypeIntel Core i5 5th Gen
CPU NameIntel Core i5-5200U
Screen Size12.1"
Screen TypeMulti-Touch Screen

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the dual Gigabit Ethernet interface cap at in real use?

Each of the two Realtek Gigabit ports tops out at 1 Gbps, so the practical ceiling is one gigabit per second per port.

What cut-out and VESA pattern does the 12.1-inch unit need to fit?

The embedded cut-out is 298.5 mm by 237 mm and the chassis also accepts standard VESA mounts.

How is the mSATA drive installed and what step is often missed?

Open the rear cover, slide the mSATA card into the single slot at a 30-degree angle, press down and secure the screw; the step people forget is pressing the card fully flat before tightening the screw.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.