partaker A5-PA-150TPC-CE5A(J19)-8G256G 15" all-in-one PC
- All-in-One
- Silver
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
partaker
A 17 inch IP65 industrial panel PC with a 10-point capacitive touch screen, Intel Core i5 1.70GHz, 8GB DDR3 and 128GB SSD in a fanless aluminium chassis
GPU Intel HD Graphics
Memory 8GB DDR3
HDD None
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This 17-inch panel PC integrates an Intel Core i5 3rd Gen processor at 1.70 GHz, 8 GB DDR3L memory and a 128 GB mSATA SSD inside a fanless aluminium chassis. The projected capacitive screen supports 10-point touch and is sealed to IP65 on the front, making it suited for factory floors, kiosks and outdoor cabinets where dust and water jets are a concern.
The jump is worthwhile when an existing system lacks IP65 ingress protection, multi-touch input or the compact VESA 75 mounting pattern. Legacy resistive-touch units and separate PC-plus-monitor setups cannot match the sealed front, the 1280 x 1024 LED backlight or the single-cable DC power architecture.
Installation uses the supplied embedded buckle kits into a 380 x 315 mm panel cut-out; VESA 75, wall, desktop or cantilever mounts are alternatives. The fanless design removes filter maintenance, but the single SODIMM slot is already populated to the 8 GB maximum, so memory cannot be expanded later.
| Model | A8-PA-170TPC-CE6A(I53)-8G128G |
|---|---|
| Form Factor | All-in-One |
| Color | Silver |
| Operating System | Windows 10 Pro |
| CPU Type | Intel Core i5 3rd Gen |
| CPU Name | 1.70GHz |
| GPU/VGA Type | Intel HD Graphics |
| Memory Capacity | 8GB DDR3 |
| HDD | No |
| Screen Size | 17.0" |
| Touchscreen | Yes |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The embedded mounting cut-out is 380 x 315 mm, matching the 17" IP65 front panel; four embedded buckle kits are included to secure the unit from behind.
Connect the supplied 12 V DC adapter to the DC-in jack; the barrel connector is centre-positive, so reversing the polarity will prevent the unit from powering on.
The 128 GB mSATA SSD and the 2.5" SATA bay are both user-replaceable; the board provides one mSATA slot and one SATA connector for SSD or HDD upgrades.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?