Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
PMDG Pacific SW1 Plus CPU water block copper base nickel finish 12 ARGB LEDs 0.2 mm microfin LGA 1700 AM5

PMDG

PMDG Pacific SW1 Plus CPU Water Block LGA 1700 AM5 0.2 mm microfin 12 ARGB 90 W

SKU CH-2WYE-FBBYS

A CPU water block for LGA 1700 and AM5 sockets with a 0.2 mm microfin copper base, built-in temperature sensor and 12 addressable RGB LEDs controllable via TT RGB Plus software

  • Precise temperature monitoring with built-in sensor
  • 2 mm microfin structure optimises coolant flow
  • 12 addressable LEDs cover 16.8 million colours
  • LGA 1700 and AM5 sockets supported
  • 90 W cooling capacity at 1 dB noise

Precision Cooling for Modern Sockets

The Pacific SW1 Plus CPU water block mounts directly on Intel LGA 1700 and AMD AM5 platforms. Its copper base features anti-corrosive nickel plating and an optimized 0.2 mm microfin internal structure. A built-in temperature sensor provides real-time thermal feedback. Rated for 90 watts of cooling capacity, it targets builders assembling high-performance desktop loops.

Loop Integration and Flow

The unit connects via a standard 4-pin power connector operating at 5 volts. It requires a pump, reservoir, radiator and tubing to complete a custom liquid cooling circuit. The microfin design reduces flow restriction, freeing up pump head pressure for other components. Maximum rotational speed reaches 9200 RPM while noise level stays at 1 dB.

Software-Controlled Lighting

Twelve addressable LEDs deliver a 16.8 million colour RGB spectrum managed through TT RGB Plus software. Synchronisation with other compatible devices is handled inside the application. No additional lighting hardware is needed. The CL-W379-CU00SW-A model includes the water block and mounting hardware for both supported sockets.

Kohokohdat

  • Precise temperature monitoring with built-in sensor
  • 2 mm microfin structure optimises coolant flow
  • 12 addressable LEDs cover 16.8 million colours
  • LGA 1700 and AM5 sockets supported
  • 90 W cooling capacity at 1 dB noise

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How does the 0.2 mm microfin structure handle heat once the 90 W limit is reached?

The copper base with 0.2 mm microfin channels spreads heat across the cold plate until the 90 W thermal ceiling is hit.

What noise level should I expect when the pump runs at 9200 RPM all day?

The pump is rated at 1 dB, so it stays near-silent even at the maximum 9200 RPM speed during continuous operation.

Which motherboard socket must I already have for this block to mount?

You need a motherboard with either an LGA 1700 or AM5 socket; the mounting hardware supports both platforms out of the box.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.