Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Full-height dual-slot workstation graphics card, silver cooler, four DisplayPort and one USB-C output

PNY Technologies, Inc.

PNY Technologies, Inc. 5.1 Quadro RTX 8000 48GB GDDR6 ECC workstation graphics card

SKU CH-6B46-1WZ7B MPN 5.1

Workstation GPU with 48 GB GDDR6 ECC memory, 4,608 CUDA cores and 576 Tensor cores for AI and rendering workloads

  • Memory TypeGDDR6
  • 48 GB GDDR6 ECC memory protects large datasets from corruption
  • 4,608 CUDA cores deliver 16.3 TFLOPS single-precision performance for compute workloads
  • 576 Tensor cores provide 130.5 TFLOPS tensor performance for AI acceleration
  • 72 RT cores with 100 GB/s NVLink bandwidth enable multi-GPU scaling
  • Four DisplayPort 1.4 and VirtualLink outputs drive up to four 4K displays at 120 Hz

Professional visual computing card

The PNY Quadro RTX 8000 delivers 48 GB of GDDR6 memory with ECC protection and a 384-bit interface for demanding visual computing workloads. It provides 4,608 CUDA cores, 576 Tensor cores and 72 RT cores connected through a PCI Express 3.0 x16 slot. Four DisplayPort 1.4 outputs and one VirtualLink connector support up to four simultaneous displays at high resolutions.

Studios needing maximum frame-buffer capacity

This card suits professionals who require 48 GB of GPU memory for large datasets, complex rendering or multi-application workflows. It is not suited for buyers who need more storage than the card provides or builders who require a second card for NVLink scaling beyond two GPUs. Gamers seeking higher single-precision throughput per pound should evaluate alternatives.

Verify power and physical clearance

Confirm the power supply can deliver the 295 W total board power with the required connectors before ordering. Ensure the chassis accommodates the 4.4 H x 10.5 L dual-slot form factor and that the motherboard offers a full-length PCIe 3.0 x16 slot. Check that display cables match the four DisplayPort 1.4 and VirtualLink outputs.

Kohokohdat

  • 48 GB GDDR6 ECC memory protects large datasets from corruption
  • 4,608 CUDA cores deliver 16.3 TFLOPS single-precision performance for compute workloads
  • 576 Tensor cores provide 130.5 TFLOPS tensor performance for AI acceleration
  • 72 RT cores with 100 GB/s NVLink bandwidth enable multi-GPU scaling
  • Four DisplayPort 1.4 and VirtualLink outputs drive up to four 4K displays at 120 Hz

Tekniset tiedot

Memory TypeGDDR6

Kysymyksiä tästä tuotteesta

What power supply capacity is needed for the 295 W total board power?

A power supply rated above 295 W with a PCIe 3.0 x16 slot and sufficient 8-pin or 12-pin connectors will deliver the 295 W total board power.

Can I run this card in a PCIe 3.0 x16 slot alongside an older PCIe 2.0 GPU?

Yes, the card operates at PCIe 3.0 x16 and will coexist with a PCIe 2.0 GPU; each device runs at its own link speed.

How do I confirm the 48 GB GDDR6 ECC memory is active after installation?

GPU-Z or NVIDIA SMI will report 48 GB GDDR6 with ECC enabled, and the driver control panel shows the memory configuration.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.