BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
PNY Technologies, Inc.
32GB dual-channel DDR4 kit at 3600MHz CL18 with 1.35V XMP 2.0 support and low-profile heat spreaders for tight builds
This kit provides 32GB of DDR4 memory across two 16GB modules. The low profile design measures 32mm in height, making it suitable for compact desktop builds where clearance is limited. It is intended for PC enthusiasts and gamers seeking a dual channel configuration.
Verify that your motherboard supports 288-pin DDR4 modules and can operate at 1.35V. The kit runs at 3600MHz with CL18 timings and is backwards compatible with lower speeds including 3200, 3000, 2933, 2800, 2666, 2400 and 2133MHz. Enable Intel XMP 2.0 in the BIOS to apply the rated profile.
An integrated black heat spreader dissipates heat during sustained workloads without active cooling. Operating at 1.35V keeps power draw modest for standard desktop use. The unbuffered, non-ECC design runs quietly as there are no moving parts on the modules.
| Brand | PNY |
|---|---|
| Series | XLR8 |
| Model | MD32GK2D4360018LP |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL18 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Lähetyspaino | 0.09 kg |
| Pakkauksen mitat | 200 × 118 × 10 mm |
The modules measure 32mm tall, so they fit under most tower coolers that leave at least that much clearance above the DIMM slots.
Enable the Intel XMP 2.0 profile in BIOS and the kit will run at 3600MHz CL18 1.35V without manual timing entry.
The kit is backwards compatible and will down-clock to 3200MHz, 3000MHz, 2933MHz, 2800MHz, 2666MHz, 2400MHz or 2133MHz as needed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?