NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
PNY Technologies, Inc.
A single-slot workstation GPU with 24 GB GDDR7 ECC memory, 8960 CUDA cores and 280 Tensor cores on a 192-bit bus, drawing 145 W over PCIe 5.0 x16
The PNY RTX PRO 4000 puts 8960 CUDA cores and 280 Tensor cores into a single-slot, full-height form factor. It targets engineers, designers and AI developers who need 24 GB of GDDR7 memory with ECC for large datasets and neural-rendering workloads.
The card draws 145 W through one PCIe CEM5 16-pin connector and fits a PCI Express 5.0 x16 slot. Active cooling exhausts heat toward the rear bracket; verify that your chassis has clearance for a full-height, single-slot card and that the power supply includes the required 16-pin lead or a certified adapter.
Confirm the motherboard exposes a PCI Express 5.0 x16 link and that the case length accommodates a full-height board. Ensure the PSU delivers the 16-pin connector without daisy-chaining, and that your display cables match the four DisplayPort 2.1b outputs for up to four monitors.
| Brand | PNY |
|---|---|
| Series | Blackwell |
| Model | VCNRTXPRO4000B-PB |
| Part Number | VCNRTXPRO4000B-PB |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU | RTX PRO 4000 |
| CUDA Cores | 8960 |
| Tensor Cores | 280 |
| Memory Size | 24GB |
| Memory Interface | 192-bit |
| Memory Type | GDDR7 with ECC |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.6 |
| DisplayPort | 4x DisplayPort 2.1b |
| AI Features | AI Ready |
| Max Displays Per Board | 4 |
| Virtual Reality Ready | Yes |
| Auxiliary Power Connector | 1x PCIe CEM5 16-pin |
| Power Consumption | 145W |
| Max GPU Length | 244 mm |
| Slot Width | Single Slot |
| Dimensions (L x H) | 4.4 inch x 9.6 inches |
| Lähetyspaino | 0.83 kg |
| Pakkauksen mitat | 356 × 216 × 76 mm |
Verify the GPU is detected in Device Manager with 8960 CUDA cores and 24 GB GDDR7 memory showing ECC active. Run a professional viewport or compute workload and check that power draw stays near 145 W under load.
The card itself is supplied in bulk packaging with a single-slot, full-height bracket installed. You must provide a PCIe 5.0 x16 slot, a 16-pin CEM5 auxiliary power cable from your PSU, and four DisplayPort 2.1b cables for multi-monitor setups.
Only one configuration exists: 24 GB GDDR7 on a 192-bit bus with 8960 CUDA cores and 280 Tensor cores. Select it when you need maximum single-slot memory capacity and AI throughput for professional rendering or simulation workloads.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?