PNY Technologies, Inc.
PNY Technologies, Inc. XLR8 CS3030 M280CS3030-1TB-RB 1TB internal SSD
M.2 2280 internal SSD with 1 TB capacity, PCIe 3.0 x4 interface, up to 3500 MB/s read and 3000 MB/s write speeds, 2,000,000-hour MTBF, 3D TLC NAND, 0°C to 70°C operating range
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D TLC
- InterfacePCI-Express 3.0 x4
- Fast boot and app launch with up to 3500 MB/s sequential read
- Large 1TB capacity in compact M.2 2280 form factor
- PCIe 3.0 x4 interface delivers up to 3000 MB/s sequential write
- High endurance rated at 2,000,000 hours MTBF for reliable storage
- Low power design runs cool and quiet from 0°C to 70°C
Form factor and capacity
This PNY XLR8 CS3030 is a 1TB internal solid-state drive built to the M.2 2280 form factor. It connects through a PCI Express 3.0 x4 interface and uses 3D TLC NAND memory. The drive is designed for consumer workloads and has a mean time between failures of 2,000,000 hours.
Who it suits and who should look elsewhere
The drive fits builders or upgraders with an M.2 slot that accepts PCIe 3.0 x4 devices and who want faster boot times and quicker application launches. Systems limited to slower interfaces or different physical connectors will not be able to use this drive. Buyers needing a DRAM cache should consider other models.
Interface and speed
The PCI Express 3.0 x4 interface enables sequential read speeds of up to 3500 MBps and write speeds of up to 3000 MBps. These transfer rates are the primary specification that determines whether the drive matches the performance target of a given build.
Kohokohdat
- Fast boot and app launch with up to 3500 MB/s sequential read
- Large 1TB capacity in compact M.2 2280 form factor
- PCIe 3.0 x4 interface delivers up to 3000 MB/s sequential write
- High endurance rated at 2,000,000 hours MTBF for reliable storage
- Low power design runs cool and quiet from 0°C to 70°C
Tekniset tiedot
| Brand | PNY |
|---|---|
| Series | XLR8 CS3030 |
| Model | M280CS3030-1TB-RB |
| Part Number | M280CS3030-1TB-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 3.0 x4 |
| Cache | 0MB |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3000 MBps |
| MTBF | 2,000,000 hours |
| Features | Sequential Read of up to 3,500 MB/s and Write of up to 3,000 MB/s Faster boot up and quicker application launch Better overall system performance Reliable storage Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 2.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| Lähetyspaino | 0.03 kg |
| Pakkauksen mitat | 130 × 97 × 15 mm |
Kysymyksiä tästä tuotteesta
Does my motherboard need an M.2 2280 slot with PCI-Express 3.0 x4 support for this drive?
Yes, the drive uses the M.2 2280 form factor and a PCI-Express 3.0 x4 interface, so the motherboard must provide that slot and protocol.
Will this PCIe 3.0 x4 SSD run at full speed in an older PCIe 2.0 M.2 slot?
It will operate but is limited to the PCIe 2.0 x4 bandwidth ceiling, so sequential speeds will not reach the rated 3,500 MB/s read or 3,000 MB/s write.
How can I confirm the drive is delivering its rated 3,500 MB/s read and 3,000 MB/s write after installation?
Run a sequential benchmark such as CrystalDiskMark on the drive; results approaching 3,500 MB/s read and 3,000 MB/s write indicate it is performing to specification.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
