Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six white 120 mm case fans with infinity mirror ARGB rings on both sides, PWM connectors and a bundled RF controller hub

Portholic

Portholic 120mm Infinity Mirror ARGB Case Fan White 6-Pack

SKU CH-G0KS-S43EQ

Six 120 mm ARGB fans with infinity-mirror lighting deliver 33 CFM airflow at 23.5 dBA and PWM speeds from 600 to 1,800 RPM

  • TypeCase Fan
  • ColorWhite
  • LEDARGB

Option 6 Packs

  • Vivid infinity-mirror ARGB lighting visible from front and back
  • 11-blade PWM design balances 63 CFM airflow with 24 dBA noise
  • Hydraulic bearing rated for 20 000 hours of reliable operation
  • PWM speed range 600-1 800 RPM adjusts cooling to temperature
  • Included RF remote and hub simplify multi-fan light control

Six-Pack White ARGB Case Fans

This six-pack of white 120 mm case fans adds addressable RGB lighting and cooling to a desktop build. Each fan uses an 11-blade design with a hydraulic bearing for a rated lifespan of 20,000 hours. The set includes a fan controller and hub so all six units can be managed together. Buyers who need larger diameter fans or a different colour scheme should look elsewhere.

Tool-Free Mounting With Included Hub

The fans screw into standard 120 mm mounting points and connect to the supplied hub, which then plugs into a 5 V 3-pin addressable RGB header and a PWM fan header on the motherboard. An RF remote is also provided for lighting changes without software. Builders whose motherboard lacks a 5 V ARGB header will need a separate controller or cannot use the addressable lighting features.

Check Header Count And Clearance

Verify that your motherboard has a spare 5 V 3-pin ARGB header and a 4-pin PWM header for the hub before ordering. Confirm the case has enough 120 mm mounting positions for six fans and that cable routing space exists for the hub and remote receiver. The fans operate between 600 and 1,800 RPM with a maximum airflow of 63 CFM and noise of 24 dBA.

Kohokohdat

  • Vivid infinity-mirror ARGB lighting visible from front and back
  • 11-blade PWM design balances 63 CFM airflow with 24 dBA noise
  • Hydraulic bearing rated for 20 000 hours of reliable operation
  • PWM speed range 600-1 800 RPM adjusts cooling to temperature
  • Included RF remote and hub simplify multi-fan light control

Tekniset tiedot

TypeCase Fan
ColorWhite
LEDARGB

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I confirm the fan speed is responding to temperature changes after installation?

The motherboard PWM control adjusts speed between 600 and 1800 RPM based on temperature. Watch the BIOS or fan software to see the RPM rise and fall with load.

Does the 6-pack include the RF remote and fan hub, or must I buy them separately?

The box contains six 120 mm fans, one fan controller and one fan hub. The RF remote is also included for lighting changes.

Which speed range should I expect — the 600-1800 RPM spec or the 650-1800 RPM spec?

The PWM function operates from 600 to 1800 RPM. The 650-1800 RPM figure appears in the general specifications for the same model.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.