Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White coated brass rotary elbow fitting with male and female G1/4 threads angled 30 degrees

PrimoChill

PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting Sky White diy cooling

SKU CH-SYHC-NR3K2

A G1/4 rotary elbow that redirects tubing 30 degrees with full directional adjustment

  • TypeFittings

Option Sky White

Näytä 10 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Redirects tubing runs at unconventional angles with a 30-degree rotary elbow
  • Rotary function aims the connection in any desired direction 30 degrees from the mount
  • Coated brass construction resists corrosion for long-lasting loop reliability
  • Male and female G1/4 threads connect standard water-cooling components securely
  • Trusted US brand with 20 years of water-cooling expertise and support

30-Degree Rotary Elbow Fitting

The PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting redirects tubing runs 30 degrees from the mount. Its rotary function lets you aim the connection in any desired direction for unconventional angles. Coated brass construction provides durability for custom liquid-cooling loops. The fitting includes male and female G 1/4 threads.

Custom loop builders needing angled routing

Builders who need to change tubing direction quickly around tight component clearances will benefit from the adjustable 30-degree offset. Loops that require a straight pass-through or a fixed-angle elbow without rotary adjustment should look at alternative fitting types. The single fitting suits targeted angle corrections rather than complex multi-plane routing.

30-degree adjustable offset

The defining specification is the directional 30-degree angle combined with full rotary adjustment. This allows precise alignment of the female G 1/4 port relative to the male G 1/4 mount. Coated brass material ensures compatibility with standard liquid-cooling coolants.

Kohokohdat

  • Redirects tubing runs at unconventional angles with a 30-degree rotary elbow
  • Rotary function aims the connection in any desired direction 30 degrees from the mount
  • Coated brass construction resists corrosion for long-lasting loop reliability
  • Male and female G1/4 threads connect standard water-cooling components securely
  • Trusted US brand with 20 years of water-cooling expertise and support

Tekniset tiedot

TypeFittings

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What thread size must my existing blocks or radiators have to accept this G1/4 male-to-female rotary elbow?

The fitting provides a male G1/4 thread on one side and a female G1/4 thread on the other, so every component you connect must also use G1/4 threads.

Will the 30-degree offset and rotary action clear older rigid-tube runs that cannot be re-bent?

The elbow bends tubing 30 degrees from the mount and the rotary body lets you spin the outlet to any angle, helping route around legacy components without re-bending tube.

How can I confirm the coated brass body and rotary joint are seated correctly after installation?

Tighten the male G1/4 thread into the component, spin the female end to the desired angle, then pressurise the loop — no coolant should escape from either thread or the rotary joint.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.