Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four vacuum-sealed spools of 1.75 mm PLA+ filament in black, white, fluorescent yellow and dark wood colours

PrintOxe

PrintOxe PLA+ Pro 4-colour pack 1.75 mm 1 kg each 3D printer filament

SKU CH-851S-QFRBD

Four 1 kg spools of 1.75 mm PLA+ filament in black, white, fluorescent yellow and dark wood, vacuum-sealed with desiccant for moisture protection and ±.03 mm dimensional accuracy

  • TypeFilament
  • Four colour packs totalling 8.8 lb of filament
  • 75 mm diameter with ± .03 mm accuracy for precise extrusion
  • Vacuum-sealed with desiccant to prevent moisture absorption
  • High-purity PLA+ formulation reduces warping and eliminates clogging
  • Spools fit standard FDM printers with 2.20 in hub holes

Four-colour PLA+ Pro filament pack

This PrintOxe set contains four 1 kg spools of PLA+ Pro filament in Black, White, Fluorescent Yellow and Dark Wood colour. Each spool is 1.75 mm diameter with dimensional accuracy of +/- .03 mm. The material is vacuum-sealed with desiccant to protect against moisture. Total net weight is 8.8 LBs across the four packs.

Makers using 1.75 mm FDM printers

The filament works with FDM printers that accept 1.75 mm material, including many popular brands. Buyers who need a different diameter or a non-PLA material should look elsewhere. Users wanting more than four colours in one purchase or a single large spool will not find that here. The Dark Wood option is a colour only, not a wood-filled composite.

Diameter tolerance of +/- .03 mm

This precision figure determines whether the filament feeds reliably in a given extruder. A tighter tolerance reduces the risk of clogging and improves layer consistency. If a printer requires looser or stricter tolerance than .03 mm, this pack may not suit. The spool dimensions are 7.88" diameter, 2.69" width with a 2.20" hub hole.

Kohokohdat

  • Four colour packs totalling 8.8 lb of filament
  • 75 mm diameter with ± .03 mm accuracy for precise extrusion
  • Vacuum-sealed with desiccant to prevent moisture absorption
  • High-purity PLA+ formulation reduces warping and eliminates clogging
  • Spools fit standard FDM printers with 2.20 in hub holes

Tekniset tiedot

BrandPrintOxe
ModelPLA+ / Pro PLA
TypeFilament

Kysymyksiä tästä tuotteesta

Does my FDM printer need a 1.75 mm filament path to use this PLA+ Pro pack?

Yes, the filament is 1.75 mm diameter with a dimensional accuracy of ±0.03 mm, so the printer must accept that size.

Will the 20.015 cm spool diameter and 5.59 cm hub hole fit on my printer's existing spool holder?

The spools measure 20.015 cm in diameter, 6.83 cm wide, with a 5.59 cm hub hole; check your holder against those dimensions.

How can I confirm the filament is feeding correctly after loading it?

Look for smooth extrusion with no clogging or blistering, strong layer adhesion, and a consistent surface finish on the first test print.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.