Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Light blue PLA+ filament spool in vacuum-sealed box

PrintOxe

PrintOxe PLA+ Pro Light Blue Filament 1.75 mm 1 kg +/- .03 mm

SKU CH-QHD4-1TRSG

Light blue PLA+ filament on a 1 kg spool with ±0.03 mm accuracy for 1.75 mm FDM printers

  • ColorBlue
  • TypeFilament
  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • +/- .03 mm dimensional accuracy ensures precise extrusion
  • 100% new high-purity material reduces shrinkage and warping
  • 75 mm diameter compatible with many FDM printers
  • 190-200°C nozzle temperature range for reliable printing

Filament for 1.75 mm FDM printers

This PrintOxe PLA+ Pro filament is a 1.75 mm diameter spool weighing 1 kg net. It is made from 100 % new high-purity material designed for lower shrinkage and minimal warping. The product suits hobbyists and professionals who need consistent extrusion on compatible FDM machines. Vacuum sealing with desiccant protects the coil from humidity until opened.

Check nozzle temperature and spool fit

Verify that your printer accepts 1.75 mm filament and can reach the recommended nozzle range of 190 °C to 200 °C (374 °F to 392 °F). Confirm the spool dimensions — 7.88 in diameter, 2.69 in width and a 2.20 in hub hole — match your holder or enclosure. The dimensional accuracy is held to +/- .03 mm, so ensure your slicer settings reflect that tolerance.

Sealed packaging keeps material dry

The spool ships vacuum-sealed with a desiccant pack inside the retail box, preserving filament quality during storage. This packaging reduces the risk of moisture-related defects such as bubbling or poor layer adhesion before the first print. No additional software, tools or adapters are included in the bundle.

Kohokohdat

  • 1 kg net weight vacuum-sealed with desiccant for moisture protection
  • +/- .03 mm dimensional accuracy ensures precise extrusion
  • 100% new high-purity material reduces shrinkage and warping
  • 75 mm diameter compatible with many FDM printers
  • 190-200°C nozzle temperature range for reliable printing

Tekniset tiedot

BrandPrintOxe
ModelPLA+ / Pro PLA
ColorBlue
TypeFilament

Kysymyksiä tästä tuotteesta

What comes inside the vacuum-sealed box and what must be purchased separately?

The box contains a 1 kg spool of 1.75 mm PLA+ Pro filament vacuum-sealed with desiccant. No additional items are included; the 3D printer itself must be bought separately.

Which version or capacity should I choose for a standard FDM printer?

This single 1 kg spool with ±0.03 mm accuracy is the only version offered; choose it if your printer accepts 1.75 mm filament and you need a light blue PLA+ material.

What does the ±0.03 mm dimensional accuracy mean when the filament is loaded in my printer?

It means the 1.75 mm diameter stays within 0.03 mm of nominal throughout the spool, giving consistent extrusion and fewer clogs at the recommended 190–200 °C nozzle temperature.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.