NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Pstaroth
Delivers 2000 W through a non-modular ATX design with 16 GPU connectors and 90 % efficiency for multi-card mining rigs
The Pstaroth 2000W ATX unit delivers 2000 W maximum output with a 90 % conversion rate. It targets mining rigs and multi-GPU workstations that need sustained high current on the 12 V rail. A non-modular cable loom provides 24-pin ATX, 4+4-pin EPS, sixteen 6+2-pin PCIe, eight SATA and four large 4-pin connectors. The PSU auto-switches between 110 V and 220 V input.
A 165 mm ball-bearing fan moves air through the chassis while a dust cover limits particle ingress. When internal temperature exceeds 50 centigrade the supply triggers high-temperature protection to prevent damage. Pure copper core wiring resists heat during continuous loads. The 90 % conversion rate reduces waste heat and lowers overall power draw in normal mining or compute operation.
The fixed cable set eliminates modular sockets but supplies enough 6+2-pin leads for eight graphics cards without adapters. Eight SATA plugs handle storage arrays while the 24-pin and 4+4-pin headers cover mainstream ATX motherboards. Automatic 110-220 V ranging simplifies deployment across regions. The non-modular design means unused cables remain in the case, so cable routing space must be planned.
| Type | ATX |
|---|---|
| Maximum Power | 2000 W |
| Modular | Non-Modular |
Plug each GPU into one of the sixteen 6+2 PIN cables; the step many miss is confirming the 20+4 PIN motherboard connector and the 4+4 PIN CPU connector are both seated before routing the GPU cables.
The ball-bearing fan is the only moving component; expect to clean dust from its grill and, after extended heavy loads, plan to replace the fan if bearing noise appears.
The unit triggers high-temperature protection when internal temperature exceeds 50 centigrade, shutting down output until it cools.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?