Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Raspberry Pi 4B board in 9-layer acrylic case with 7 inch IPS touchscreen 1024 by 600

Raspberry Pi

Raspberry Pi 4B 1 GB barebone mini PC with 7 inch touchscreen, 32 GB card, acrylic case

SKU CH-FRA9-X0Y40

Barebone mini PC kit with 7 inch IPS touchscreen at 1024 by 600 resolution and 32 GB preloaded card

  • Form FactorRaspberry Pi
  • 1 GB Raspberry Pi 4B core for compact projects
  • 7 inch IPS touchscreen at 1024 x 600 resolution
  • 32 GB microSD card pre-loaded with official OS
  • 9-layer acrylic case with copper and aluminium heatsinks
  • Type-C power cable with inline switch for easy control

Kit contents and target use

This bundle pairs a Raspberry Pi 4B with 1 GB of memory with a 7 inch IPS touchscreen running at 1024 by 600 resolution. A 32 GB microSD card arrives pre-loaded with the official operating system. The kit suits learners, hobbyists and prototype builders who want a complete desktop-style package in one box.

Thermals noise and power

Passive cooling comes from one copper and three aluminium heatsinks mounted on the main board. No fan is included, so the system runs silently during typical desktop or coding tasks. Power is supplied through a Type-C cable with an inline switch, drawing only the current the board and screen require.

Sustained load behaviour

Under continuous heavy compute the heatsinks absorb and spread heat without active airflow. The metal case panels add surface area for dissipation. Throttling may occur sooner than on a fanned enclosure, so the kit is best suited to workloads with idle periods rather than constant maximum utilisation.

Kohokohdat

  • 1 GB Raspberry Pi 4B core for compact projects
  • 7 inch IPS touchscreen at 1024 x 600 resolution
  • 32 GB microSD card pre-loaded with official OS
  • 9-layer acrylic case with copper and aluminium heatsinks
  • Type-C power cable with inline switch for easy control

Tekniset tiedot

ModelRaspberry Pi 4B python suite 1GB Large Screen Kit
Form FactorRaspberry Pi

Kysymyksiä tästä tuotteesta

How do I assemble the 9-layer acrylic case around the board and the 7 inch touchscreen without cracking the layers?

Peel the protective film from each acrylic sheet, stack them in the numbered order shown in the kit diagram, insert the board and screen housing into the cut-outs, then tighten the screws by hand — over-torquing is the step that cracks the layers.

Which part of the cooling set will need replacement first if the board runs warm continuously?

The thermal pads on the copper and three aluminium heat sinks dry out and lose contact after extended heat cycles; replace those pads rather than the metal sinks themselves.

At what display resolution does the 1024 by 600 IPS panel become the bottleneck for graphical output?

The panel is fixed at 1024 by 600, so any content rendered above that resolution is down-scaled by the board — the screen itself is the first limit you hit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.