NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Replace Power
A 220 W Flex-ATX unit with 24-pin, 4-pin and Sata connectors for 115 / 230 V input
This 220W proprietary power supply replaces the HP 633195-001 and Bestec FH-ZD221MGR units. It fits the HP TouchSmart 310-1205la desktop and many other slimline systems requiring a Flex-ATX form factor. The grey housing weighs 1 kg and accepts 115 or 230 V input.
Builders who need higher wattage for discrete graphics cards or additional drive bays should look at something else. Systems requiring standard ATX dimensions or different connector layouts cannot use this unit. The proprietary design limits compatibility to the listed HP and compatible slimline models.
The connector set determines whether this PSU matches the target motherboard and storage devices. Verify that the host board uses a 24-pin main power socket and a 4-pin auxiliary socket. The two Sata power leads support compatible drives or peripherals.
| Brand | Replace Power |
|---|---|
| Color | Grey |
| Type | Proprietary Power Supply |
| Weight | 1 |
Align the proprietary Flex-ATX housing with the chassis rails, secure the mounting screws, then attach the 24 pin motherboard connector, the 4 pin connector and the two Sata connectors. The step often missed is fully seating the 4 pin CPU power plug, which can prevent the system from posting.
The internal fan and electrolytic capacitors are the components that age. Expect to clean dust from the fan intake every 6 to 12 months and plan on replacing the supply if voltages drift or the fan becomes noisy after several years of continuous operation.
The 220 watt maximum output is the hard ceiling. Sustained loads near that level will hit the over-current protection on the 12 volt rail first, causing the unit to shut down before thermal limits are reached.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?