Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Grey ATX power supply unit with single fan and multiple cable connectors

Replace Power

Replace Power AP-MPS3ATX30-35 300W ATX power supply

SKU CH-PYJW-YVNXS MPN AP-MPS3ATX30-35

A 300W ATX power supply with one fan and connectors for SATA, peripheral and floppy drives

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 300 W output keeps Emachine ET1161-07 and ET1641 running
  • High efficiency design reduces wasted energy
  • Low ripple and noise delivers clean power
  • Over-voltage protection guards connected components
  • Three SATA connectors power multiple drives

Replacement 300W ATX supply

This 300W ATX unit is built as a direct replacement for eMachines ET1161-07 and ET1641 desktops. It fits standard ATX chassis and uses a single fan for cooling. The grey enclosure weighs 0.1 kg. It targets owners of those specific models who need a like-for-like power module.

Connector check before ordering

Verify that your motherboard accepts one 20+4-pin ATX connector and one 4-pin ATX12V connector. Count the drives you plan to power: the unit provides three SATA power connectors, two peripheral connectors and one floppy connector. Ensure the total number of devices matches these available leads.

Thermals noise and power draw

The single fan moves air through the grey housing during normal operation. Rated output is 300W steady power with low ripple and noise on the rails. Output over-voltage protection is included. High efficiency is claimed for typical desktop loads.

Kohokohdat

  • 300 W output keeps Emachine ET1161-07 and ET1641 running
  • High efficiency design reduces wasted energy
  • Low ripple and noise delivers clean power
  • Over-voltage protection guards connected components
  • Three SATA connectors power multiple drives

Tekniset tiedot

BrandReplace Power
ModelAP-MPS3ATX30-35
ColorGrey
TypeATX
Fans1
Weight0.1

Kysymyksiä tästä tuotteesta

What connectors come with the AP-MPS3ATX30-35 and what must be sourced separately?

The unit includes one 20+4-pin ATX, one 4-pin ATX12V, two peripheral, one floppy and three SATA connectors. No extra cables are required for a standard Emachine ET1161-07 or ET1641 installation.

Is the 300 W model the only capacity offered for this replacement series?

Only the 300 W version is listed for the AP-MPS3ATX30-35. It is rated to deliver 300 W of steady power for the ET1161-07 and ET1641 chassis.

What does the 300 W rating mean once the supply is installed in an Emachine ET1161-07?

It provides up to 300 W of continuous output with high efficiency, low ripple and noise, and output over-voltage protection for stable operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.