Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Grey ATX power supply unit with single fan and multiple cables

Replace Power

Replace Power RPSU-C99-50 420W ATX power supply

SKU CH-6P66-G8NMJ MPN RPSU-C99-50

A 420 W ATX power supply with a switchable 110 V / 220 V input, one 80 mm fan, and connectors including 20+4 pin ATX, ATX12V, SATA, Molex and floppy for eMachines T3410, T3414, T3418, T3408.

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • Delivers 420W to run eMachines T3410 T3414 T3418 T3408 T3422 T3504 systems
  • Switchable 110V 220V input suits worldwide mains voltages
  • Single 80mm fan cools the unit quietly
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Includes SATA power lead for modern drives

420W ATX Replacement Power Supply

The Replace Power RPSU-C99-50 is a 420W ATX power supply designed to replace a failed unit in eMachines T3410, T3414, T3418, T3408, T3422 and T3504 desktops. It also fits HP, Dell, Compaq and other common systems requiring standard ATX power. A single 80mm fan provides cooling.

Upgrade From Failed OEM Unit

This unit replaces an original power supply that has failed or become unstable in the listed eMachines models and compatible OEM systems. The jump is worth it when the existing PSU no longer delivers reliable power or has damaged connectors. It restores operation with a new 420W module and a full complement of cables.

Limits Of Fixed 110V/220V Switch

The supply uses a manual 110V/220V input voltage switch rather than active PFC. Users must set the switch correctly for the local mains voltage before connecting power. The 20+4 pin ATX connector supports both 20-pin and 24-pin motherboards, while SATA and peripheral connectors cover standard drives. Builders needing higher wattage or modular cables cannot use this unit.

Kohokohdat

  • Delivers 420W to run eMachines T3410 T3414 T3418 T3408 T3422 T3504 systems
  • Switchable 110V 220V input suits worldwide mains voltages
  • Single 80mm fan cools the unit quietly
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Includes SATA power lead for modern drives

Tekniset tiedot

BrandReplace Power
ModelRPSU-C99-50
ColorGrey
TypeATX
Fans1
Weight0.1

Kysymyksiä tästä tuotteesta

Will the RPSU-C99-50 fit the standard ATX cut-out in my eMachines T3410 case?

Yes, the unit is an ATX form-factor power supply designed as a direct replacement for the eMachines T3410, T3414, T3418, T3408, T3422 and T3504 models.

Which power cables must I connect during installation, and which one is most often missed?

Connect the 14-inch 20+4 pin ATX motherboard cable, the 14-inch 12V ATX cable, the 15-inch SATA cable, the two 15-inch and two 6-inch large peripheral cables, and the 6-inch small peripheral cable; the 12V ATX cable is the one most frequently overlooked.

What part of the RPSU-C99-50 will need attention first as the unit ages?

The single 80 mm cooling fan is the only moving component and will be the first item to require cleaning or replacement.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.