Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold edge connectors

RIMLANCE

RIMLANCE 8GB DDR4 2133 CL15 ECC Registered RDIMM 2Rx8 1.2V 288-Pin

SKU CH-94GZ-TGK7E

8GB registered ECC DDR4 module running at 2133 MT/s with CL15 latency for server workloads

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered signal buffering enables stable operation in multi-module server configurations
  • 2133 MT/s DDR4 speed delivers responsive throughput for demanding applications
  • CL15 latency timing supports efficient memory access cycles
  • 2 V low-voltage design reduces power draw per module

Server DDR4 ECC RDIMM 8GB

The RIMLANCE 8GB DDR4 2133 CL15 module is a registered ECC RDIMM built for servers and workstations that require error-correcting memory. It uses a 288-pin form factor and operates at 1.2V. This module is not for systems that accept only unbuffered non-ECC DIMMs.

Registered 2Rx8 organisation

The single specification that decides compatibility is the registered 2Rx8 organisation with ECC. The board and CPU must support registered DDR4 DIMMs with this rank configuration. Buyers whose platforms require unbuffered memory or a different rank layout cannot use this module.

Low-voltage DDR4 operation

Rated at 1.2V and DDR4-2133 speed, the module runs at standard JEDEC voltage for reduced power draw and heat in normal server workloads. The registered buffer adds minimal latency while improving signal integrity for stable continuous operation.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • Registered signal buffering enables stable operation in multi-module server configurations
  • 2133 MT/s DDR4 speed delivers responsive throughput for demanding applications
  • CL15 latency timing supports efficient memory access cycles
  • 2 V low-voltage design reduces power draw per module

Tekniset tiedot

BrandRIMLANCE
ModelRRD17000D8C8
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

What real-world throughput can I expect from the PC4-17000 rating once the module is installed?

The PC4-17000 designation corresponds to a peak bandwidth of 17 000 MB/s at the rated 2133 MT/s clock, though actual throughput depends on the server's memory controller and channel configuration.

How does the registered DDR4 interface affect signal integrity and maximum capacity per channel?

The on-module register buffers address and command signals, reducing electrical load on the memory controller and allowing larger memory populations per channel than unbuffered DIMMs.

Will this 288-pin RDIMM fit in a standard DDR4 server DIMM slot?

Yes, the 288-pin form factor matches the DDR4 RDIMM socket used in compatible servers and workstations; verify your platform supports registered ECC modules before installing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.