Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact USB 3.2 Type-A adapter cable with SATA and U.2 connectors, integrated LED, and 12V power brick

Sabrent

Sabrent EC-U2SA USB 3.2 Type A to SATA/U.2 hard drive adapter

SKU CH-TRE7-R0M8G MPN EC-U2SA

Connects 2.5 and 3.5 SATA drives plus U.2 SSDs via USB 3.2 at 10 Gbps with included power adapter and TRIM support

  • Connect 2.5 and 3.5 SATA drives plus U.2 SSDs via USB 3.2 Gen 2x1
  • Reach up to 10Gbps bandwidth with backward compatibility to older USB ports
  • Included 12V power adapter ensures stable operation for power-hungry 3.5 HDDs and U.2 SSDs
  • Tool-free plug-and-play design with integrated USB cable and LED power indicator
  • Supports TRIM and UASP for drive endurance and performance on Windows, macOS and Linux

Versatile Drive Connectivity

The Sabrent EC-U2SA adapter connects 2.5 and 3.5 SATA SSDs or HDDs and 2.5 U.2 SSDs to a computer through a USB 3.2 Gen 2x1 Type-A port. It suits technicians, upgraders and anyone who needs quick, temporary access to bare drives without opening a chassis or installing a dock.

Tool-Free Build With Integrated Cable

A single moulded USB cable removes the need for a separate lead, while the tool-less drive slot lets you swap SATA or SFF-8639 drives in seconds. An included 12V 2A power brick with a 5.9 Ft cord supplies the extra current that 3.5 HDDs and U.2 SSDs require for stable operation, and a blue LED confirms the link is live.

USB 3.2 Gen 2x1 Speed With UASP And TRIM

The interface delivers up to 10Gbps bandwidth and falls back to older USB speeds automatically. UASP and TRIM support keep sustained transfers smooth and help maintain SSD endurance during long cloning or recovery sessions. The adapter draws power from the host for low-draw 2.5 drives and from the external brick for heavier units, keeping heat and noise negligible in typical use.

Kohokohdat

  • Connect 2.5 and 3.5 SATA drives plus U.2 SSDs via USB 3.2 Gen 2x1
  • Reach up to 10Gbps bandwidth with backward compatibility to older USB ports
  • Included 12V power adapter ensures stable operation for power-hungry 3.5 HDDs and U.2 SSDs
  • Tool-free plug-and-play design with integrated USB cable and LED power indicator
  • Supports TRIM and UASP for drive endurance and performance on Windows, macOS and Linux

Tekniset tiedot

BrandSABRENT
Lähetyspaino0.25 kg
Pakkauksen mitat127 × 127 × 51 mm

Kysymyksiä tästä tuotteesta

What speeds can the USB 3.2 Gen 2x1 interface actually deliver?

The adapter is rated for up to 10 Gbps over USB 3.2 Gen 2x1 and will fall back to lower USB speeds when connected to older ports.

What drive sizes and connectors does the adapter physically accommodate?

It accepts 2.5 and 3.5 SATA drives plus 2.5 U.2 (SFF-8639) SSDs, and a 12 V / 2 A power adapter is included for 3.5 HDDs and U.2 drives.

What is the correct order to connect everything so the drive is recognised?

Plug the power adapter into the unit first, then attach the drive, and finally connect the integrated USB cable to the computer; the LED will show when power is ready.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.