Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green M.2 2280 circuit board with gold edge connector and black label

SanDisk

SanDisk WDS100T1R0B-68A4Z0 1TB internal SSD

SKU CH-NHVK-CECHG MPN WDS100T1R0B-68A4Z0

M.2 2280 SATA SSD with 1TB 3D NAND, up to 560 MB/s read and 530 MB/s write, built for 24/7 NAS caching

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfaceSATA III

Options 1TB M.2

  • Optimised for NAS caching to accelerate frequent file access
  • M.2 2280 form factor fits modern NAS slots directly
  • Sequential read up to 560 MBps and write up to 530 MBps
  • Random read up to 95,000 IOPS and write up to 85,000 IOPS
  • MTTF up to 2M hours for 24/7 reliability

NAS-ready M.2 SATA SSD

This SanDisk 1TB internal solid-state drive uses the M.2 2280 form factor and a SATA interface. It is built with 3D NAND and designed for caching workloads in network-attached storage systems. Home and business users who need reliable 24/7 operation will find it suited to their NAS slots.

Built for continuous NAS duty

The drive carries a 2M-hour MTTF rating and is engineered to withstand heavy read and write loads typical of always-on environments. Its M.2 2280 connector fits directly into compatible NAS bays without a 2.5-inch carrier. Operating temperatures from 0°C to 70°C and 1,500G shock resistance support dependable day-to-day use.

560 MB/s sequential read ceiling

Maximum sequential read reaches 560 MBps and sequential write reaches 530 MBps over the SATA link. Random performance is rated at 95,000 IOPS read and 85,000 IOPS write. These figures determine whether the drive can keep pace with multi-user databases, photo rendering or 4K and 8K video editing workloads.

Kohokohdat

  • Optimised for NAS caching to accelerate frequent file access
  • M.2 2280 form factor fits modern NAS slots directly
  • Sequential read up to 560 MBps and write up to 530 MBps
  • Random read up to 95,000 IOPS and write up to 85,000 IOPS
  • MTTF up to 2M hours for 24/7 reliability

Tekniset tiedot

BrandWestern Digital
SeriesRed SA500
ModelWDS100T1R0B
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfaceSATA III
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 530 MBps
4KB Random ReadUp to 95,000 IOPS
4KB Random WriteUp to 85,000 IOPS
MTTFUp to 2M hours
FeaturesStorage optimized for caching in NAS systems to rapidly access your most frequently used files.
Superior endurance can handle the heavy read and write loads demanded by NAS, giving you the reliability you need in a 24/7 environment.
Reduces latency and improves responsiveness for OLTP databases, multi-user environments, photo rendering, 4K and 8K video editing, and more.
Available in 2.5" and M.2 form factors to fit the slots in modern NAS systems.
Capacities from 500GB up to 4TB (2.5" only) gives you the flexibility to customize your NAS to meet your most demanding storage needs.
Power Consumption (Idle)Slumber (mW): 56
DEVSLP (mW): 5-12
Power Consumption (Active)Average Active Power (mW): 60
Max Read Operating (mW): 2,550
Max Write Operating (mW): 3,750
Operating Temperature0°C ~ +70°C
Storage Temperature-55°C ~ +85°C
Max Shock Resistance1,500G @ 0.5 msec half sine
Max Vibration ResistanceOperating: 5.0 gRMS, 10-2000 Hz
Non-operating: 4.9 gRMS, 7-800 Hz
Height2.38mm
Width22.00mm
Depth80.00mm
Weight7.00g
Lähetyspaino0.05 kg
Pakkauksen mitat140 × 132 × 20 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this M.2 2280 drive work in a NAS that only has SATA M.2 slots?

Yes, the drive uses the SATA III interface and the M.2 2280 form factor, so it fits NAS units with SATA M.2 slots.

What steady read and write speeds can I expect for large files?

Sequential reads reach up to 560 MB/s and writes up to 530 MB/s over the SATA III link.

Is the endurance high enough for a 24/7 NAS cache workload?

The drive is rated for up to 2M hours MTTF and built for heavy read/write loads in always-on NAS environments.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.