SanDisk WDS250G3B0B-00AXS0 250GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Consumer
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
SanDisk
250 GB SATA III SSD with 3D NAND TLC, up to 555 MB/s read and 440 MB/s write, 100 TBW endurance and 1.75 M-hour MTTF
The SanDisk WDS250G3B0A-00AXR0 is a 250GB internal solid-state drive built on 3D NAND TLC memory. It uses the SATA III 6 Gb/s interface in a 2.5-inch form factor and is rated for consumer workloads. Sequential speeds reach up to 555 MB/s read and 440 MB/s write, with 4KB random performance of 80,000 IOPS read and 78,000 IOPS write. Endurance is rated at 100TB written and MTTF up to 1.75M hours.
The drive fits standard 2.5-inch drive bays and connects through a regular SATA data and power cable. No additional drivers are required for modern operating systems. The main issue is forgetting to initialise the new volume in disk management, which leaves the drive invisible in the file explorer. Cloning software is available as a download, but the process can stall if the source disk has bad sectors or if the target drive is not set as the first boot device after migration.
Confirm the motherboard or laptop has a free SATA III port and that the 2.5-inch bay accepts a 7mm drive height. Check that the system BIOS recognises SATA AHCI mode for best performance. Ensure the power supply provides a spare SATA power connector. The drive operates between 0°C and 70°C, so verify case airflow meets this range. Active power draw peaks at 2,000 mW during writes, while idle slumber is 36 mW and DEVSLP is 12 mW.
| Brand | Western Digital |
|---|---|
| Series | Blue SA510 |
| Model | WDS250G3B0A |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 250GB |
| Memory Components | 3D NAND TLC |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 555 MBps |
| Max Sequential Write | Up to 440 MBps |
| 4KB Random Read | Up to 80,000 IOPS |
| 4KB Random Write | Up to 78,000 IOPS |
| Terabytes Written (TBW) | 100TB |
| MTTF | Up to 1.75M hours |
| Features | Upgrade Your Creativity Featuring read speeds up to 560MB/s (500GB and 1TB models), this fast SATA SSD delivers a performance boost that keeps up with your workloads so you can stay creative and be more productive. Give Your PC a Makeover Why buy an expensive new desktop? With capacities of up to 1TB, high endurance, plus low power draw for more laptop life between charges and reduced vibrations compared to HDDs, the WD Blue SA510 SATA SSD is the perfect drive for a powerful PC upgrade. Help Protect Your Content Clone your computer's entire hard drive to your WD Blue SA510 drive with |
| Power Consumption (Idle) | Slumber (mW): 36 DEVSLP (mW): 12 |
| Power Consumption (Active) | Average Active Power (mW): 50 Max Read Operating (mW): 1,800 Max Write Operating6 (mW): 2,000 |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -55°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 msec half sine |
| Max Vibration Resistance | Operating Vibration: 5.0 gRMS, 10-2000 Hz Non-operating Vibration: 4.9 gRMS, 7-800 Hz |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.20mm |
| Weight | 34.60g |
| Lähetyspaino | 0.06 kg |
| Pakkauksen mitat | 126 × 102 × 20 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Use the Western Digital SSD Dashboard to check that the drive reports 250GB capacity, 3D NAND TLC memory, SATA III link speed, and SMART health status showing 100% life remaining.
The box contains the 2.5-inch 250GB SSD and a download licence for Acronis True Image for Western Digital cloning software; a SATA data cable, power cable, and 2.5-to-3.5-inch bracket are not included.
The 250GB model delivers up to 555 MB/s read and 440 MB/s write with 100 TBW endurance; larger 500GB and 1TB versions reach 560 MB/s read if you need more space and higher write endurance.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?