Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Sapphire Tech

Sapphire Tech NITRO+ Radeon RX 9070 XT 11348-01-20G graphics card

SKU CH-QKHS-Y7F51 MPN 11348-01-20G

Delivers 16 GB GDDR6 on a 256-bit bus with boost clocks up to 3060 MHz, PCIe 5.0 x16, and triple-fan cooling in a 3.2-slot ATX design

  • InterfacePCI Express 5.0 x16
  • Chipset ManufacturerAMD
  • GPU SeriesAMD Radeon RX 9000 Series
  • GPURadeon RX 9070 XT
  • ArchitectureRDNA 4
  • Game ClockUp to 2520 MHz

Option NITRO+

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Edition RX 9070 XT

  • RX 9070 XT
  • RX 9070
  • RX 9070 GRE

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Boost clock up to 3060 MHz for high frame rates
  • 16 GB GDDR6 on a 256-bit bus for large textures
  • PCI Express 5.0 x16 interface for maximum bandwidth
  • Triple-fan cooler handles 304 W thermal design power
  • Two HDMI and two DisplayPort 2.1a outputs drive four displays

Sapphire NITRO+ RX 9070 XT 16GB

This graphics card uses the AMD Radeon RX 9070 XT GPU built on RDNA 4 architecture. It delivers 16GB of GDDR6 memory across a 256-Bit interface running at 20 Gbps. The board targets enthusiasts who want high-frame-rate 4K gaming and content creation workloads. A triple-fan cooler handles the 304W thermal design power.

Check PSU PCIe 5.0 power connector

Your power supply must provide at least 850W and include a native 12V-2x6 connector for the single PCIe 5.0 power input. Verify the case can clear 331 mm in length and 3.2 slot width for the ATX form factor. Ensure the motherboard has a PCI Express 5.0 x16 slot to match the card interface. Confirm display cables suit two HDMI and two DisplayPort 2.1a outputs.

Suits 4K gamers and creators needing 16GB VRAM

The 4096 stream processors and boost clock up to 3060 MHz suit high-refresh 4K gaming and GPU-accelerated creative apps. Users with smaller cases, PSUs below 850W, or older PCIe 3.0 platforms should consider a shorter, lower-power model. Multi-monitor setups benefit from the four-display support at 7680 x 4320 max resolution.

Kohokohdat

  • Boost clock up to 3060 MHz for high frame rates
  • 16 GB GDDR6 on a 256-bit bus for large textures
  • PCI Express 5.0 x16 interface for maximum bandwidth
  • Triple-fan cooler handles 304 W thermal design power
  • Two HDMI and two DisplayPort 2.1a outputs drive four displays

Tekniset tiedot

BrandSAPPHIRE
SeriesNITRO+
Model11348-01-20G
Part Number11348-01-20G
InterfacePCI Express 5.0 x16
Chipset ManufacturerAMD
GPU SeriesAMD Radeon RX 9000 Series
GPURadeon RX 9070 XT
ArchitectureRDNA 4
Game ClockUp to 2520 MHz
Boost ClockUp to 3060 MHz
Stream Processors4096
Effective Memory Clock20000 MHz (20 Gbps)
Memory Size16GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI2 x HDMI
DisplayPort2 x DisplayPort 2.1a
ColorGray
Max Resolution7680 x 4320
Virtual Reality ReadyYes
CoolerTriple Fans
Thermal Design Power304W
Recommended PSU Wattage850W
Power Connector1 x 12V-2x6-pin
HDCP ReadyYes
Form FactorATX
Max GPU Length331 mm
Card Dimensions (L x H)331 x 129 x 66 mm
Slot Width3.2 Slots
Lähetyspaino2.63 kg
Pakkauksen mitat432 × 241 × 89 mm

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is included in the box and what must I buy separately?

The card ships with the triple-fan cooler installed and a 12V-2x6 power adapter. You must supply an 850W PSU, a PCIe 5.0 x16 slot and your own display cables.

How do I decide between the available versions or capacities?

This model is a single SKU with 16GB GDDR6 on a 256-bit bus and a 3060 MHz boost clock; there are no alternate memory sizes or factory-overclocked variants to choose from.

What does the 3060 MHz boost clock mean once the card is in my system?

It is the peak frequency the GPU can reach under load, limited by the 304W power budget, thermals and the 850W PSU you provide.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.