Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Seagate

Seagate IronWolf ST2000VN004 2TB 5900 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-ZXH0-9TGCR MPN ST2000VN004

A 2 TB, 5900 RPM SATA hard drive with 64 MB cache, CMR technology and AgileArray firmware built for 24×7 NAS and RAID use

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity2TB
  • RPM5900 RPM
  • Cache64MB
  • FeaturesOptimized for NAS with AgileArray. AgileArray enables dual-p
  • Designed for 24/7 NAS operation with 1M hours MTBF
  • AgileArray technology enables dual-plane balancing and RAID optimisation in multi-bay systems
  • IronWolf Health Management focuses on prevention, intervention and recovery
  • Rotational vibration sensors maintain performance in multi-drive enclosures
  • 180TB yearly workload rate supports heavy multi-user NAS traffic

Capacity and interface

The Seagate IronWolf ST2000VN004 is a 2TB 3.5-inch internal hard drive with a SATA 6.0Gb/s interface and 5900 RPM spindle speed. It is built for always-on network-attached storage and carries a 64MB cache.

Suited for multi-bay NAS.

This drive targets NAS owners who run multi-bay enclosures and need RAID optimisation, dual-plane balancing and rotational vibration sensors for 24x7 operation. Builders who need a 2.5-inch form factor for laptops or external enclosures should look elsewhere, as the physical size is 3.5 inches. Users who want a drive rated for workloads above 180TB per year should also consider other options.

The 180TB per year workload rating decides fit

IronWolf Health Management and AgileArray firmware support prevention, intervention and recovery in compatible NAS units. The 1M-hour MTBF and 26.11mm height confirm the drive is designed for continuous multi-drive environments rather than occasional desktop storage.

Kohokohdat

  • Designed for 24/7 NAS operation with 1M hours MTBF
  • AgileArray technology enables dual-plane balancing and RAID optimisation in multi-bay systems
  • IronWolf Health Management focuses on prevention, intervention and recovery
  • Rotational vibration sensors maintain performance in multi-drive enclosures
  • 180TB yearly workload rate supports heavy multi-user NAS traffic

Tekniset tiedot

BrandSeagate
SeriesIronWolf
ModelST2000VN004
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity2TB
RPM5900 RPM
Cache64MB
FeaturesOptimized for NAS with AgileArray. AgileArray enables dual-plane balancing and RAID optimization in multi-bay environments, with the most advanced power management possible.
Actively protect your NAS with IronWolf Health Management focusing on prevention, intervention and recovery.1
High performance means no lag time or downtime for users during workload traffic for the NAS. Seagate leads the competition with the highest-performing NAS drive portfolio.2
Rotational Vibration (RV) sensors. First in its class of drives to include RV sensors to maintain high performance in multi-drive NA
UsageFor NAS systems
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.85mm
Length (maximum)146.99mm
Lähetyspaino0.57 kg
Pakkauksen mitat160 × 114 × 28 mm

Kysymyksiä tästä tuotteesta

Does the SATA 6.0Gb/s interface limit the 5900 RPM drive's real-world throughput?

The SATA 6.0Gb/s link caps burst speed at 6 Gbit/s; sustained sequential transfers from the 5900 RPM platters typically run well below that ceiling.

Will the 3.5-inch form factor with 26.11 mm height fit my four-bay NAS tray?

The drive measures 146.99 mm long, 101.85 mm wide and 26.11 mm high — standard 3.5-inch dimensions that match most NAS hot-swap trays.

How do I install the bare drive in a NAS and what step is often missed?

Slide the drive into the tray, secure it with the supplied screws, connect SATA data and power cables, then enable AgileArray and IronWolf Health Management in the NAS firmware — the health monitoring step is frequently skipped.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.