Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular eight-bay RAID enclosure with Thunderbolt and USB-C ports

Seagate

Seagate STNC32000400 32TB 8-bay Thunderbolt RAID array

SKU CH-70W3-9PDVM MPN STNC32000400

Eight-bay Thunderbolt RAID array with 32TB capacity and hardware RAID supporting multiple configurations for high-speed data transfer

  • Eight 4TB drives deliver 32TB total capacity
  • Three Thunderbolt 5 ports enable 2800 MB/s transfer speeds
  • Hardware RAID controller supports RAID 0, 1, 6, 10, 50, 60 and JBOD
  • Pre-configured in RAID 5 for immediate data protection
  • USB-C 3.2 Gen 2x2 port adds flexible connectivity

Eight-bay Thunderbolt 5 storage

The Seagate STNC32000400 is an eight-bay desktop RAID array built for creative professionals who need high-capacity, hardware-accelerated storage. It ships with eight 4TB SATA III hard drives pre-configured in RAID 5, delivering 32TB of protected space. Three Thunderbolt 5 ports and a USB-C 3.2 Gen 2x2 port provide flexible host connectivity for demanding media workflows.

Upgrade from direct-attached or single-drive setups

This array replaces slower single-drive externals or software RAID enclosures when sustained throughput and on-the-fly redundancy become critical. The hardware RAID controller offloads parity calculations from the host CPU, making the jump worthwhile for video editors, photographers and audio engineers who cannot afford rebuild-time downtime or performance drops during drive failure.

2800 MB/s peak throughput with RAID 5 resilience

The controller supports RAID 0, 1, 5, 6, 10, 50, 60 and JBOD, letting you trade capacity for speed or safety as projects evolve. At up to 2800 MB/s it comfortably handles multi-stream 4K and 8K ingest, render and export. It runs out when workloads demand all-flash latency, more than eight spindles or interface bandwidth beyond what Thunderbolt 5 and USB-C 3.2 Gen 2x2 can deliver.

Kohokohdat

  • Eight 4TB drives deliver 32TB total capacity
  • Three Thunderbolt 5 ports enable 2800 MB/s transfer speeds
  • Hardware RAID controller supports RAID 0, 1, 6, 10, 50, 60 and JBOD
  • Pre-configured in RAID 5 for immediate data protection
  • USB-C 3.2 Gen 2x2 port adds flexible connectivity

Tekniset tiedot

BrandSeagate
ModelSTNC32000400
Part NumberSTNC32000400
Lähetyspaino17.83 kg
Pakkauksen mitat432 × 394 × 325 mm

Kysymyksiä tästä tuotteesta

What physical space does the eight-bay 3.5-inch SATA array need on a desk?

The unit holds eight 3.5-inch SATA III drives in a single enclosure, so allow enough flat surface for the chassis and clearance at the rear for three Thunderbolt 5 ports, one USB-C 3.2 Gen 2x2 port and power connections.

Which step do users often miss when setting up the hardware RAID controller?

After inserting the drives, use the front-panel controls or the supplied utility to select the desired RAID level — RAID 0, 1, 5, 6, 10, 50 or 60 — before formatting; the array ships in RAID 5 but will not protect data until the choice is confirmed and the volume initialised.

When will the four-terabyte SATA drives inside the 32TB array need replacement?

The eight 4TB SATA III 3.5-inch HDDs are rated for continuous operation; monitor SMART attributes via the management software and plan drive replacement when reallocated-sector counts rise or the hardware RAID controller flags a degraded array.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.