Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack chassis with twelve front 3.5-inch drive bays

Shenzhen Junxiangcheng Technology Co.,

Shenzhen Junxiangcheng Technology Co., 2U server chassis 12-bay 12Gb/s SAS expander SFF-8643 SGPIO empty

SKU CH-J1B1-7W1C0

2U server chassis holds twelve front 3.5-inch drives with a 12Gb/s SAS expander backplane and SFF-8643 interface

  • Form Factor2U
  • 12 front 3.5" bays with 12Gb/s SAS expander backplane
  • 12Gb/s SFF-8643 interface enables high-speed storage connectivity
  • Tool-free top cover and slide-rail trays simplify drive maintenance
  • 4× 80mm hot-swap fan positions deliver high airflow cooling
  • 7 half-height PCIe slots plus CRPS redundant PSU support

2U Server Chassis with 12Gb/s SAS Expander

This 2U server chassis holds twelve front 3.5-inch drives compatible with 2.5-inch units and three internal 2.5-inch bays. A 12Gb/s SAS expander backplane uses Mini-SAS HD SFF-8643 connections and adds SGPIO signalling plus time-sharing start-up. The enclosure targets cloud storage, big data and security monitoring deployments needing high-density hot-swap storage.

Compatibility Checklist Before Ordering

Verify the motherboard fits the 12-by-13-inch maximum footprint and that the 650mm depth clears your rack rails. Confirm the power supply is a standard 2U or CRPS redundant unit no longer than 300mm. Ensure the host controller presents Mini-SAS HD SFF-8643 ports and supports SGPIO for drive LED management. The chassis provides seven half-height vertical PCIe slots for add-in cards.

Sustained Load Behaviour

Three 8038 ball-bearing fans deliver high static pressure and airflow with hot-swap capability for continuous cooling. Temperature-controlled fan curves adjust speed as drive and component heat rises during long transfers. The 1.0mm SGCC chassis resists fingerprints and aids thermal stability while front drive trays use anti-EMI design with light-guide columns for status indication. Tool-free top cover removal simplifies extended maintenance windows.

Kohokohdat

  • 12 front 3.5" bays with 12Gb/s SAS expander backplane
  • 12Gb/s SFF-8643 interface enables high-speed storage connectivity
  • Tool-free top cover and slide-rail trays simplify drive maintenance
  • 4× 80mm hot-swap fan positions deliver high airflow cooling
  • 7 half-height PCIe slots plus CRPS redundant PSU support

Tekniset tiedot

Form Factor2U

Kysymyksiä tästä tuotteesta

Does the chassis ship with drives, rails or a power supply, or must I buy them separately?

The unit is an empty chassis; the 12 front 3.5-inch bays and three internal 2.5-inch bays accept drives you supply, and the PSU bay fits any standard 2U or CRPS redundant supply up to 300 mm long.

Should I choose the 12Gb/s SAS expander backplane or a simpler pass-through version for my controller?

The backplane is a 12Gb/s expander with SFF-8643 Mini-SAS HD connectors, SGPIO signalling and time-sharing boot support, so a single HBA can address all 12 bays without extra cabling.

What does the 12Gb/s expander rating mean once the chassis is populated and running?

Each of the 12 bays can run at the full 12Gb/s SAS link speed, and the expander aggregates that traffic over the SFF-8643 uplinks to your controller while SGPIO drives the activity LEDs on every drive tray.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.