Shiny Snake G300 MESH SFF PC Case 16.8L Black
- Micro ATX / Mini-ITX
- Black
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Shiny Snake
A 20.8L Micro ATX case with full mesh panels, fitting 340mm GPUs, 165mm coolers, 160mm ATX PSUs and five 120x25mm fans for vertical exhaust
Color White
Material MESH
The Shiny Snake G350-MESH is a 20.8-litre chassis that accepts Micro ATX and Mini ITX motherboards. It targets builders who want a small desktop footprint without sacrificing full-size component support. The white SPCC frame includes full mesh panels for unrestricted intake and a reinforced carry handle for portable setups.
A dedicated top chamber fits two 120x25mm fans to create a direct vertical exhaust path for CPU and GPU heat. Native back-connect motherboard routing hides every cable behind the tray, while the horizontal ATX power supply layout up to 160mm deep removes GPU cable interference. Five total 120x25mm fan mounts are available, though fans are not included.
The interior fits graphics cards up to 340mm long such as RTX 4090 or 5090 models and CPU coolers up to 165mm tall. Storage is limited to one internal 3.5-inch bay and one 2.5-inch bay, so builders needing multiple hard drives or additional SSDs will run out of mount points. Front I/O provides USB 2.0, USB 3.0, USB 3.1 Type-C and audio connections.
| Motherboard Compatibility | Micro ATX / ITX / Mini ITX |
|---|---|
| Power Supply Mounted | Top |
| Color | White |
| Case Material | SPCC |
| Type | Micro ATX Desktop |
| Power Supply | 16cm ATX |
| With Power Supply | No |
| Side Panel | Mesh Panel |
| Dust Filters | Yes |
| Front Ports | USB 2.0 / USB 3.0 / USB 3.1 Type-C / Audio |
| Brand | Shiny Snake |
| Series | G-series |
| Model | G350-MESH |
| Part Number | SSMG350MWT |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 4 |
| Fan Options | 5 x 12025mm |
| Max GPU Length | 340 mm |
| Max CPU Cooler Height | 165 mm |
| Dimensions | 345x212x285mm |
| Weight | 4.1kg |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The case includes dust filters on its full-mesh panels; clean them every few months with compressed air or a soft brush to maintain the 20.8L chassis airflow.
With five 120x25mm fan mounts and a dedicated top exhaust chamber, the CPU cooler — capped at 165mm height — typically reaches its cooling ceiling before the GPU.
The full-mesh design and vertical exhaust path keep noise and heat low; actual levels depend on the five 120x25mm fans you install and the 160mm ATX PSU chosen.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?