Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Silverstone

Silverstone PT15B-H1D2 NUC PC case

SKU CH-MK17-NSGKQ MPN PT15B-H1D2

A palm-sized aluminum case for Intel Haswell NUC boards with pre-assembled Wi-Fi antenna, VESA 75 and DIN rail mounts

  • ColorBlack
  • Case MaterialAluminum / Plastic
  • Motherboard CompatibilityIntel NUC
  • Front Ports1 x USB port
  • Dimensions1.61" x 5.12" x 4.33"
  • Weight0.66 lb.
  • Premium aluminium construction gives a stylish, durable finish
  • Pre-assembled Wi-Fi antenna and Bluetooth simplify deployment
  • Super-small 130 x 110 x 41 mm design fits in a palm
  • VESA MISD-75 bracket enables monitor or wall mounting
  • DIN-rail support allows industrial or rack installation

Compatibility & Purpose

The PT15B-H1D2 is a compact enclosure designed for Intel Haswell-based NUC motherboards. Its aluminum and plastic construction measures 130mm x 110mm x 41mm and weighs 0.66 lb. The case includes a pre-assembled Wi-Fi antenna and Bluetooth module for wireless connectivity. It targets builders seeking a premium, palm-sized chassis for a Next Unit of Computing.

Pre-Build Verification

Confirm your motherboard is a Haswell-generation Intel NUC board supported by the PT15 series. The chassis fits the stock NUC cooler via a removable bottom tray. Check that your specific NUC model aligns with the PT15B-H1D2 variant, which provides one HDMI and two DisplayPort openings. Ensure required internal headers match the front USB port.

Thermals, Noise & Power

The case relies on the installed NUC board's stock cooler for thermal management. Aluminum panels assist passive heat dissipation within the 41mm slim profile. No case fans are included, so acoustic output depends entirely on the motherboard's cooling solution. Power draw is determined by the NUC components housed inside the enclosure.

Kohokohdat

  • Premium aluminium construction gives a stylish, durable finish
  • Pre-assembled Wi-Fi antenna and Bluetooth simplify deployment
  • Super-small 130 x 110 x 41 mm design fits in a palm
  • VESA MISD-75 bracket enables monitor or wall mounting
  • DIN-rail support allows industrial or rack installation

Tekniset tiedot

BrandSilverStone
ModelPT15B-H1D2
ColorBlack
Case MaterialAluminum / Plastic
Motherboard CompatibilityIntel NUC
Front Ports1 x USB port
Dimensions1.61" x 5.12" x 4.33"
Weight0.66 lb.
FeaturesCompatible with most Intel Haswell-based NUC motherboards
Premium aluminum construction & SilverStone styling
Pre-assembled WIFI antenna and Bluetooth for ease of deployment
Super small design at 130mm x 110mm x 41mm
Includes VESA MISD-75 mounting bracket
Supports DIN rail mounting
Lähetyspaino0.49 kg
Pakkauksen mitat156 × 149 × 105 mm

Kysymyksiä tästä tuotteesta

Does the PT15B-H1D2 include the NUC motherboard or must I supply my own?

The case is sold without a motherboard; you must provide a compatible Intel Haswell-based NUC board.

The listing shows four model variants — which one matches a board with one HDMI and two DisplayPort outputs?

The PT15B-H1D2 designation corresponds to the version that exposes one HDMI port and two DisplayPort connectors on the rear I/O.

At 130 mm x 110 mm x 41 mm, will the assembled unit fit behind a monitor using the included VESA 75 bracket?

Yes, the 1.61-inch thick chassis and supplied VESA MIS-D 75 bracket allow direct mounting on the back of any 75 mm VESA-compatible display.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.