Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 172-pin MicroDIMM DDR2 module, 47mm by 32mm, eight BGA chips on both sides

Simmtec, Inc

Simmtec, Inc 1GB DDR2 533MHz PC2-4200 172-pin MicroDIMM desktop RAM

SKU CH-Q1S7-7B8MV

A 1 GB DDR2 module running at 533 MHz in a 172-pin MicroDIMM form factor measuring 47 mm by 32 mm, operating at 1.8 V with an unbuffered, non-ECC design and double-sided BGA chips

  • Capacity1GB
  • 1GB capacity upgrades DDR2 systems
  • 533MHz speed matches PC2-4200 standard
  • 8V operation reduces power draw
  • 172-pin MicroDIMM fits compact boards
  • Unbuffered non-ECC design for desktop use

Simmtec 1GB DDR2 MicroDIMM

This Simmtec module delivers 1 GB of DDR2 memory at 533 MHz through a 172-pin MicroDIMM interface. It suits owners of legacy compact desktops or embedded boards that require the 47 mm by 32 mm form factor and 1.8 V operation. The JEDEC-standard PC2-4200 rating ensures baseline compatibility with platforms designed for this speed grade.

Sustained load behaviour

The unbuffered, non-ECC design with eight BGA chips split across both sides of the PCB provides standard desktop-grade throughput for continuous workloads. Without error-correction circuitry the module relies on the memory controller for data integrity during extended sessions. The fixed 1.8 V supply voltage keeps power draw predictable under prolonged use.

Upgrade context

This part replaces a failed or lower-capacity MicroDIMM in systems that accept only the 172-pin, 47 mm by 32 mm layout. The jump is worthwhile when the platform supports PC2-4200 speeds and the application benefits from a full 1 GB rank. It does not fit standard DIMM slots or SODIMM sockets, so buyers needing those formats must look elsewhere.

Kohokohdat

  • 1GB capacity upgrades DDR2 systems
  • 533MHz speed matches PC2-4200 standard
  • 8V operation reduces power draw
  • 172-pin MicroDIMM fits compact boards
  • Unbuffered non-ECC design for desktop use

Tekniset tiedot

Capacity1GB

Kysymyksiä tästä tuotteesta

How much power does the 1.8 V DDR2 module draw when running continuously?

The module operates at a standard 1.8 V supply voltage typical for DDR2 memory. Actual power draw depends on the motherboard's memory controller and system load.

What motherboard slot is required for this 172-pin MicroDIMM?

This stick uses a 172-pin MicroDIMM connector measuring 47 mm by 32 mm. It only fits motherboards with a matching MicroDIMM socket, not standard DIMM or SO-DIMM slots.

Will the 533 MHz speed work if my board only supports slower DDR2?

The module is rated for PC2-4200 at 533 MHz. DDR2 memory typically downclocks to match the motherboard's maximum supported speed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.