Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR3 memory module with gold edge contacts and black chips

SK hynix

SK hynix 16GB DDR3 1600 CL11 1.35V ECC Registered server RAM

SKU CH-92J6-584PZ

16 GB registered DDR3 ECC module running at 1600 MT/s with CL11 latency and 1.35 V operation

  • Capacity16GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with built-in error correction
  • Registered design improves signal integrity for stable server operation
  • Low 1.35V voltage reduces power draw and heat output
  • DDR3 1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • CL11 latency ensures quick memory access for demanding workloads

Capacity and Role

This 16GB DDR3 module is built for servers that require registered ECC memory. It suits administrators upgrading or repairing compatible platforms where data integrity and stability take priority over raw bandwidth.

Build Integration

The registered buffer reduces electrical load on the memory controller, allowing higher module counts per channel. Its 1.35V operation lowers power draw compared to standard 1.5V DDR3, freeing thermal headroom in dense chassis. The module fits DDR3 RDIMM slots keyed for PC3-12800 signalling.

Thermals and Power

Running at 1.35V keeps heat output modest under typical server workloads. Passive airflow across the DIMM area is usually sufficient; no active cooling on the module itself is required. Power consumption scales with capacity and frequency, staying within standard DDR3 limits.

Kohokohdat

  • ECC protection prevents data corruption with built-in error correction
  • Registered design improves signal integrity for stable server operation
  • Low 1.35V voltage reduces power draw and heat output
  • DDR3 1600 speed delivers 12800 MB/s bandwidth for responsive performance
  • CL11 latency ensures quick memory access for demanding workloads

Tekniset tiedot

BrandHynix
Capacity16GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered

Kysymyksiä tästä tuotteesta

What is the CAS latency limit that affects sustained throughput on this DDR3 1600 module?

The module runs at CL11, so each column access adds 11 cycles before data is returned under continuous load.

How much heat and power does the 1.35 V registered ECC DIMM produce during all-day operation?

At 1.35 V the DIMM draws less current than standard 1.5 V DDR3, reducing heat output in a fully populated server chassis.

Which server board features must already be present to use this registered ECC memory?

The motherboard needs DDR3 slots that support registered ECC modules and a memory controller able to address 16 GB per DIMM.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.