BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277131BTC
Varastossa
SK hynix
SK hynix HMA81GS6DJR8N-XN 8GB DDR4-3200 CL22 SO-DIMM laptop RAM
8GB DDR4-3200 CL22 SO-DIMM laptop memory module runs at 1.20V with 260-pin unbuffered design
- Capacity8GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 8 GB capacity adds responsive multitasking headroom
- DDR4-3200 speed delivers 25600 MT/s bandwidth
- CL22 latency keeps timing tight
- 20 V operation reduces power draw
- 260-pin SO-DIMM fits standard laptop slots
8 GB DDR4-3200 SO-DIMM laptop memory
This SK hynix module delivers 8 GB of DDR4 memory in a 260-pin SO-DIMM form factor. It operates at 3200 MT/s with a CAS latency of CL22 and runs at the standard 1.20 V. The unbuffered, non-ECC design suits mainstream laptop upgrades.
Suitable for single-slot laptop upgrades
It fits users adding capacity to a free SO-DIMM slot or replacing one module in a two-slot system. Buyers needing ECC error correction or registered signal buffering should look elsewhere, as this module provides neither. Systems limited to lower DDR4 speeds will still accept the module but run it at the platform maximum.
3200 MT/s DDR4 speed rating
The decisive specification is the DDR4-3200 (PC4-25600) speed grade. Verify that the laptop's memory controller supports this data rate before purchase, as an incompatible platform will not boot or will fall back to a lower speed not guaranteed by this module.
Kohokohdat
- 8 GB capacity adds responsive multitasking headroom
- DDR4-3200 speed delivers 25600 MT/s bandwidth
- CL22 latency keeps timing tight
- 20 V operation reduces power draw
- 260-pin SO-DIMM fits standard laptop slots
Tekniset tiedot
| Brand | Hynix |
|---|---|
| Series | SODIMM Laptop Memory |
| Model | HMA81GS6DJR8N-XN |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Kysymyksiä tästä tuotteesta
Will the 260-pin DDR4 SO-DIMM fit my laptop's memory slot?
The module uses the standard 260-pin DDR4 SO-DIMM form factor. It fits any laptop slot designed for DDR4 SO-DIMM memory.
What is the correct way to seat the module and which step do people often miss?
Align the notch on the module edge with the key in the slot, insert straight in until the gold contacts are fully hidden, then press down evenly until the side clips snap into the notches on both sides.
Does the CL22 1.20V module need any firmware updates or thermal-pad replacement over time?
No firmware updates are required. The module runs at the standard 1.20V with no user-serviceable parts, so no thermal-pad replacement or ongoing maintenance is needed.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00279709BTC
Varastossa
