Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 server memory module with black chips

SK hynix

SK hynix HMT31GR7BFR4C-H9 8GB DDR3 1333 ECC Registered server RAM

SKU CH-0YF9-0WN0E MPN HMT31GR7BFR4C-H9

8 GB DDR3 ECC Registered module running at 1333 MHz with CL9 latency and 1.50 V operation

  • Capacity8GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • 8 GB capacity supports larger server workloads
  • DDR3 1333 (PC3 10600) speed delivers reliable throughput
  • ECC Registered design detects and corrects memory errors
  • CL9 latency at 1.5 V balances response time and power
  • 240-pin 2Rx4 module fits registered DDR3 server slots

8 GB DDR3-1333 ECC Registered Server Memory

This SK hynix module delivers 8 GB of DDR3 SDRAM at 1333 MT/s with a CL9 latency and 1.50 V operation. It uses a 240-pin form factor and features ECC with registered buffering in a 2Rx4 organisation. The part is new and intended for server platforms that require registered ECC memory.

Suited for servers needing registered ECC DDR3

It fits systems that specifically call for PC3-10600 registered modules with ECC error correction. It is not for desktops or workstations that only accept unbuffered non-ECC memory, nor for platforms that require a different DDR generation, voltage, speed grade, or module density.

Registered ECC with 2Rx4 organisation

The registered buffer and ECC function together with the 2Rx4 rank structure to provide the signal integrity and error detection required by compatible server chipsets. Verify that your motherboard supports registered ECC DDR3 at this speed and voltage before purchase.

Kohokohdat

  • 8 GB capacity supports larger server workloads
  • DDR3 1333 (PC3 10600) speed delivers reliable throughput
  • ECC Registered design detects and corrects memory errors
  • CL9 latency at 1.5 V balances response time and power
  • 240-pin 2Rx4 module fits registered DDR3 server slots

Tekniset tiedot

BrandHynix
ModelHMT31GR7BFR4C-H9
Capacity8GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4

Kysymyksiä tästä tuotteesta

What does the DDR3 1333 (PC3 10600) speed rating mean for actual server throughput?

The module transfers data at 1333 MT/s with CL9 timing, providing 10600 MB/s peak bandwidth per stick when the platform runs the memory at its rated frequency.

How does the 240-pin DDR3 registered ECC interface affect compatibility and error handling?

The 240-pin registered DDR3 design adds a buffer that reduces electrical load on the memory controller, while ECC circuitry detects and corrects single-bit errors for data integrity.

What physical space and slot requirements does this 8 GB module need?

It occupies one standard 240-pin DDR3 DIMM slot and requires a server motherboard that supports registered ECC memory at 1.5 V.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.